FGH4096粉末高温合金,P/M FGH4096 alloy英语短句,例句大全

FGH4096粉末高温合金,P/M FGH4096 alloy
1)P/M FGH4096 alloyFGH4096粉末高温合金
1.The link microstructure of P/M FGH4096 alloy was investigated by SEM,EDAX and TEM.利用SEM、EDAX和TEM分析研究了FGH4096粉末高温合金的"项链"组织,并对该组织的拉伸性能和细晶化作用进行探索。
2)P/M superalloy粉末高温合金
1.Thermodynamic calculation of equilibrium phases for P/M superalloys;粉末高温合金平衡相析出行为的热力学对比
2.High temperature deformation and dynamic recrystallization of a new type of P/M superalloy;某新型粉末高温合金的高温变形与动态再结晶
3.Pre-forming design of P/M superalloy disc based on equipotential field基于类等势场的粉末高温合金盘件预成形设计

英文短句/例句

1.Research on High Temperature Fatigue Life Models of Powder Metallurgy;粉末高温合金高温疲劳寿命模型研究
2.Reserch on low cycle fatigue behavior of powder metallurgy superalloy FGH96镍基粉末高温合金FGH96应变疲劳行为
3.Study on Crack Growth Life of Powder Metallurgy Superalloy Turbine Disk Containing Inclusions;含夹杂粉末高温合金涡轮盘裂纹扩展寿命研究
4.Pre-forming design of P/M superalloy disc based on equipotential field基于类等势场的粉末高温合金盘件预成形设计
5.The Procedure and Mechanics Research of Extrusion Deformation for FGH96 Alloy粉末高温合金挤压变形组织及变形机理研究
6.Deformation Character of Non-metallic Inclusions in Powder Superalloy During Isothermal Casting粉末高温合金等温锻造过程非金属夹杂物的变形特征
7.Preform Design and Processes Simulation of Isothermal Forging for PM Superalloy with Inclusions;含夹杂粉末高温合金等温预成形设计与过程模拟
8.Simulation of Isothermal Forging for Superalloy and Analysis of Thermal Load on Die;粉末高温合金盘件等温锻造模拟及模具热负荷分析
9.Genetic Characteristic and Damage Mechanical Behavior of Non-metallic Inclusions in P/M Superalloy;粉末高温合金中非金属夹杂物的遗传特征及损伤力学行为研究
10.Preform Design and Finite Element Simulation of New-type P/M Superalloy Disk Based on Equipotential Field基于类等势场的粉末高温合金盘件预成形设计及有限元模拟
11.A Quasi-equipotential Field Simulation for Preform Design of P/M Superalloy Disk粉末高温合金盘件预成形设计的类等势场分析法(英文)
12.Effect of alloy elements on the precipitation behavior of thermodynamic equilibrium phases in new type nickel-based P/M superalloys合金元素对新型镍基粉末高温合金的热力学平衡相析出行为的影响
13.RESERCH OVERVIEW ON THE EFFECT OF HAFNIUM ON PM SUPERALLOY铪在粉末冶金高温合金中的作用研究概况
14.Damage and Fracture Speciality of FGH95 Powder SuperalloyFGH95粉末冶金高温合金损伤与断裂特性研究
15.Preparation of a novel powdered Fe-based superalloy by close-coupled gas atomization紧耦合雾化制备Fe-13%Cr-3%W高温合金粉末
16.Experimental Investigation on Direct Metal Laser Sintering of Nickel-based Metal Powder Material镍基高温合金粉末直接激光烧结实验研究
17.EFFECT OF C AND Hf ON THERMODYNAMIC EQUILIBRIUM PHASE PRECIPITATION IN FGH97 PM SUPERALLOYC和Hf对FGH97粉末冶金高温合金热力学平衡相析出的影响
18.Study on Pressureless Vacuum Powders Sintering of NIB and IN738 for Bonding Repairing SuperalloyNIB与IN738混合粉末真空无压烧结连接修复高温合金

相关短句/例句

P/M superalloy粉末高温合金
1.Thermodynamic calculation of equilibrium phases for P/M superalloys;粉末高温合金平衡相析出行为的热力学对比
2.High temperature deformation and dynamic recrystallization of a new type of P/M superalloy;某新型粉末高温合金的高温变形与动态再结晶
3.Pre-forming design of P/M superalloy disc based on equipotential field基于类等势场的粉末高温合金盘件预成形设计
3)FGH95 superalloy powdersFGH95高温合金粉末
1.Carbide and its stability in FGH95 superalloy powders during rapid solidification;对快速凝固FGH95高温合金粉末中的碳化物及其稳定性进行实验研究,分析了粉末颗粒凝固过程中的热学参数和非平衡溶质分配对碳化物形成过程的影响。
4)superalloy powder高温合金粉末
1.The formation mechanism of porosity in Ni base superalloy powder produced with PREP was stated.阐述了等离子旋转电极工艺 (PREP)制取的镍基高温合金粉末内部孔洞的形成机理 ,分析了导致孔洞形成的因素 ,提出了降低粉末内部孔洞应采取的措施。
2.Mixed powder was prepared by adding 50～100μm size Al 2O 3 particles into superalloy powder in the range of 50～100μm in diameter.用人工方法将粒度范围为 5 0～ 10 0 μm的Al2 O3颗粒掺入到粒度范围为5 0～ 10 0 μm的高温合金粉末中 ,对混合粉末进行静电分离 (ESS)后 ,用体视显微镜检测Al2 O3颗粒的去除效果。
5)FGH95 superalloy powderFGH95高温合金粉末
1.Pre-heat treatment of PREP FGH95 superalloy powders;等离子旋转电极雾化FGH95高温合金粉末的预热处理
2.The microstructure characteristics of FGH95 superalloy powders prepared by plasma rotating electrode processing (PREP) have been investigated by using SEM.对等离子旋转电极雾化(PREP)FGH95高温合金粉末颗粒凝固组织特征进行研究,并用数值分析方法计算了FGH95合金粉末凝固过程中冷却速率与粉末粒度之间的关系,结果表明:粉末颗粒表面凝固组织主要是树枝晶和胞状长大晶,随着粉末颗粒尺寸的减小,内部凝固组织由树枝晶为主逐渐转变为以胞状晶及微晶组织为主,冷却速率与粉末粒度之间的关系为T=2。
3.In order to investigate the relation between microstructure of superalloy powders and the heat treatment system, this paper studied the transformation of carbides in FGH95 superalloy powders prepared by plasma rotating electrode processing (PREP) under different pre-heating treatment temperature.对等离子旋转电极雾化(PREP)FGH95高温合金粉末颗粒在不同温度下进行预热处理,并对热处理粉末中碳化物的变化规律进行分析,结果表明:经预热处理,粉末颗粒中的MC’型亚稳碳化物发生分解和转变,析出稳定的MC,M_(23)C_6及M_6C型碳化物,明显改变碳化物的稳定性和分布状态。
6)PM superalloy粉末高温合金
1.Preform Design and Processes Simulation of Isothermal Forging for PM Superalloy with Inclusions;含夹杂粉末高温合金等温预成形设计与过程模拟
2.On the basis of introducing origins of the inclusions,influence of inclusions on the failure behaviors,especially the fatigue behaviors of PM superalloys are summarized.在简要介绍粉末高温合金中夹杂物来源的基础上,分析了夹杂物对粉末高温合金损伤行为,尤其是疲劳行为的影响,并对含夹杂物粉末高温合金材料的损伤机理和疲劳寿命预测模型进行了介绍。
3.Microstructure and properties of nickel-base PM superalloy are presented.分析了镍基粉末高温合金的成型、热处理等冶金工艺及夹杂缺陷的性质等与合金组织和性能的关系,描述了粉末高温合金的热处理工艺,提出了今后我们粉末高温合金组织性能研究工作的重点。