1)Distribution of SiC particlesSiC颗粒分布
英文短句/例句
1.Effects of process factors on distribution uniformity of SiC particles in aluminium alloy composites影响铝基复合材料中SiC颗粒分布均匀性的工艺因素
2.Distribution of Nano-TiN Particles in SiC Ceramic Analysed by SEM/EDSSEM/EDS分析纳米TiN颗粒在SiC陶瓷中的分布状况
3.Fabrication, Microstructure and Mechanical Behavior of Functionally-Graded SiC Particulates Reinforced Al Matrix Composites;梯度分布的SiC颗粒增强铝基复合材料的制备，组织和力学行为
4.Effect of particle distribution on mechanical properties of multi-layer spray forming 7075/SiC_p composite after hot forming热加工后SiC颗粒的分布对喷射沉积7075/SiC_p复合材料性能的影响
5.Effect of Different Stabilization Mechanism on Dispersion Stabilization of SiC Powders in Water;不同稳定机制对SiC颗粒分散稳定性的影响
6.Analysis on Toughening Mechanisms of Different SiC Particle Reinforced Thermal Protective Ceramics几种SiC颗粒增韧防热陶瓷的增韧机制分析
7.Experimental Study of Particle Distributing Performance on Variable Aperture Particle Distributor变孔径颗粒分布板的颗粒分布性能实验研究
8.Study on Aerosol Number Concentration, Size Distribution and the Particle Formation and Growth Process;大气颗粒物个数浓度、粒径分布及颗粒物生成
9.fine ceramics(advanced ceramics, advanced technical ceramics)-sample preparation for the determination of particle size distribution of ceramic powders细陶瓷颗粒粒度分布测定-样品的制备
10.test method for particle size and distribution of powder coating粉末涂料的颗粒粒度和分布试验方法
11.Study on Recovery Process of SiC Whisker from SiC Mixture Synthesized in Infinite-mini-heat Sources Furnace;无限微热源法合成的SiC晶须与颗粒分选工艺研究
12.Microstructure and Mechanical Properties of High Volume SiC_p Reinforement Magnesium Matrix Composites高体分SiC颗粒增强镁基复合材料的显微组织与力学性能
13.The Structure and Its Characteristics Analysis of Aluminum Foam Ingot Fabricated by Molten Frothing Process Using SiC Particles Adhered MeltSiC颗粒自增粘熔体发泡法制备泡沫铝铸锭的组织及其特征分析
14.Properties of ZrB_2 ceramics reinforced by SiC nanowhiskers and SiC particles纳米SiC晶须和SiC颗粒混合增韧ZrB_2陶瓷性能
15.Computation of the mean particle size and the particle size distribution based on extinction theory基于消光法求解颗粒系的平均粒径及粒径分布
16.Elemental Size Distribution of Airborne Fine and Ultrafine Particulate Matters in the Suburb of Shanghai,China上海市郊区大气细颗粒和超细颗粒物中元素粒径分布研究
17.TiB_2+SiC Particles Hybrid Reinforced ZL109 Composites;TiB_2+SiC颗粒混杂增强ZL109复合材料
18.Nano SiC Particles In-situ Growth via Laser Irradiation;激光作用下纳米SiC颗粒的原位生长
相关短句/例句
particle distribution颗粒分布
1.Numerical Simulation and Quantitative Assessment of Particle Distribution in SiC/Al-Si Composites;SiC/Al-Si复合材料颗粒分布的数值模拟
2.The CCD image collection and analysis system with mighty function was used in the experiment to attain the orderliness of the particle distribution and movement.设计了用于气液固三相循环流化床换热器的固体颗粒分布板。
3.The numerical results show:The particle distribution of 90 ° bend pipe is optimal,the maximal erosion rate presents to the range of 40 °～ 60 ° w.模拟结果表明:在弯管为90°时,颗粒分布最为理想,最大磨损率出现在弯管中心角40°～60°的范围内,即该区域固粒对壁面的碰撞频率和强度最大。
3)particle size distribution颗粒分布
1.Gray relevant degree and gray model of particle size distribution of porland cement;水泥颗粒分布的灰色关联度分析及灰色模型
2.Influence of particle size distribution of cement on the performance of abrasion resistance of concrete;水泥颗粒分布对混凝土耐磨性能的影响
3.Effect of cement particle size distribution on its utilization;水泥颗粒分布对其使用性能的影响
4)grain distribution颗粒分布
1.The present paper discusses the theory of grain distribution and bonding of the spray patching material according to the wearing mechanism of the basic spray patching material.以碱性喷补料的损毁机理为根据 ,讨论了该类型喷补料的颗粒分布和结合理论 ,根据操作条件提出优化方案选取相应的产品 ,从而获得较好的使用效果。
5)distribution of particles颗粒分布
1.A SiCp reinforced Al-Cu alloy and Al matrix composites are fabricated by a new method - electromagnetic centrifugal casting, the effects of rotational rate for centrifugation, magnetic density, particle size and matrix on the distribution of particles and microstructure of matrix are studied.首次利用电磁离心凝固方法制备SiC_p／Al基和SiC_p／Al-Cu基复合材料，研究了离心转速、颗粒尺寸、磁场和基体对颗粒分布以及对复合材料基体组织的影响。
6)particles distribution颗粒分布
1.Experimental study of particles distribution in liquid-solid horizontal circulating fluidized bed;水平液固循环流化床颗粒分布状况的实验研究
2.Through physical property test of precalcining kiln cement ground for different time and with correlation analysis method of gray color system theory, research into effort of precalcining kiln cement particles distribution on cement strength is conducted.对经不同粉磨时间粉磨的预分解窑熟料水泥进行物理性能测试，以灰色系统理论的关联度分析法研究水泥颗粒分布对水泥强度的影响，研究结果表明：＜5μm水泥颗粒对3d强度影响最大，（5～30）μm颗粒对水泥28d强度影响最大。
3.An experiment was made of the particles distribution of each section of a single-loop solids circulation system in a φ29 mm×4 200 mm cold liquid-solid horizontal circulating fluidized bed test facility.在φ29 mm×4 200 mm流化床装置上,利用CCD图像测量与数据处理系统在线对导流叶片式局部起旋器对水平液固循环流化床内固相颗粒分布特性的影响进行了研究。
延伸阅读
Sic1、名称解释碳化硅又称金钢砂或耐火砂。碳化硅是用石英砂、石油焦(或煤焦)、木屑(生产绿色碳化硅时需要加食盐)等原料在电阻炉内经高温冶炼而成。目前我国工业生产的碳化硅分为黑色碳化硅和绿色碳化硅两种，均为六方晶体，比重为3.20～3.25，显微硬度为2840～3320kg/mm2。包括黑碳化硅和绿碳化硅，其中：黑碳化硅是以石英砂,石油焦和优质硅石为主要原料,通过电阻炉高温冶炼而成。其硬度介于刚玉和金刚石之间,机械强度高于刚玉,性脆而锋利。绿碳化硅是以石油焦和优质硅石为主要原料,添加食盐作为添加剂，通过电阻炉高温冶炼而成。其硬度介于刚玉和金刚石之间,机械强度高于刚玉。2.性质碳化硅的硬度很大，具有优良的导热和导电性能，高温时能抗氧化。3.用途(1)作为磨料，可用来做磨具，如砂轮、油石、磨头、砂瓦类等。(2)作为冶金脱氧剂和耐高温材料。碳化硅主要有四大应用领域,即: 功能陶瓷、高级耐火材料、磨料及冶金原料。目前碳化硅粗料已能大量供应, 不能算高新技术产品,而技术含量极高 的纳米级碳化硅粉体的应用短时间不可能形成规模经济。(3)高纯度的单晶，可用于制造半导体、制造碳化硅纤维。4.产地、输往国别及品质规格(1)产地：青海、宁夏、河南、四川、贵州等地。(2)输往国别：美国、日本、韩国、及某些欧洲国家。(3)品质规格：①磨料级碳化硅技术条件按gb/t2480—96。各牌号的化学成分由表6-6-47和表6-6-48给出。②磨料粒度及其组成按gb/t2477—83。磨料粒度组成测定方法按gb/t2481—83。
