1)Ordered-porous SiC(Fe) ceramic有序多孔SiC(Fe)陶瓷
2)porous SiC ceramicsSiC多孔陶瓷
1.The porous SiC ceramics were prepared by vacuum sintering in this investigation,the effect of different sintering aids,Al2O3-Y2O3 and Si,and different pore formers,acrylamide copolymer and Carboxymethyl Cellulose(CMC) on the microstructures and porosity were studied.采用真空烧结方法制备了SiC多孔陶瓷,研究了不同助烧结剂Al2O3-Y2O3、Si以及不同造孔剂丙烯酰胺聚合物、羧甲基纤维素(CMC)对SiC多孔陶瓷形貌和气孔率的影响。
2.Properties of the two kinds of porous SiC ceramics using PCS and SR as binder respectively were analyzed and compared.分别以聚碳硅烷和硅树脂作粘结剂,SiC微粉作骨料,在惰性气氛中1000℃下低温制备出SiC多孔陶瓷,所得样品的气孔率在43%～52%之间,抗断裂强度最高达到了18。
3.The flexural strength of porous SiC ceramics increased with increasing PCS content and shaping pressure,while decreased with increasing the carbon content.以聚碳硅烷为粘接剂,SiC粉末为骨料,经模压成型、惰性气氛保护下于1000℃裂解低温制得SiC多孔陶瓷。
英文短句/例句
1.The Preparation of 3D-Reticulation SiC Reinforced Al Matrix Composite三维网络SiC多孔陶瓷增强铝基复合材料的制备
2.Fabrication of Porous SiC Ceramics by Precursor Polymer-contained Slurry Slip Casting Method含先驱体聚合物浆料浇注成型制备SiC多孔陶瓷
3.STUDY ON SIC POROUS CERAMICS WITH THE PREPARATION OF RETRIEVE CUT METAL SILICO-SPINDLE WIRE硅锭线切割回收料制备SiC多孔陶瓷的研究
4.PREPARATION TECHNICS OF POROUS BIOMORPH-GENETIC SiC CERAMICS生物形态多孔SiC陶瓷的制备技术
5.Growth of Silicalite-2 Zeolite Film in Microchannels of Biomorphic Porous SiC Ceramics多孔SiC陶瓷微孔道内合成Silicalite-2分子筛膜
6.Process and Application Study of Electron-heating Porous SiC Ceramic;电致发热多孔SiC陶瓷的制备工艺与应用研究
7.Fabrication and Characterization of SiC-Based Porous Ceramic Used for High Temperature Filtration Supporter高温过滤支撑体用SiC基多孔陶瓷的制备与表征
8.Preparation of Nanoporous SiC Ceramics by Preceramic Polymer Bonding Method先驱体聚合物粘结法制备SiC纳米多孔陶瓷
9.Study on the Fabrication of Porous SiC Ceramic and Its Composite with Epoxy Resin多孔SiC陶瓷及其与环氧树脂复合材料的制备研究
10.Preparation and Basic Properties of a New Porous SiC Based on Scrap Cotton Liner利用废弃棉短绒制备多孔SiC陶瓷及其性能的研究
11.Fabrication of Nano-porous SiC-based Ceramics Using Template Method;模板法制备SiC基陶瓷纳米孔结构材料
12.Effect of Preparative Processes on the Quasi-Static Compressive Properties of Porous SiC Ceramic/Zr-Based Amorphous Composites制备工艺对多孔SiC陶瓷/Zr基非晶合金复合材料准静态压缩性能的影响
13.Emulsion Prepared by Two-Stage Ceramic Membrane Jet-Flow Emulsification and Preparation of Porous Ceramic;二次射流陶瓷膜法制乳及多孔陶瓷的制备
14.Test method for pore diameter of porous ceramicGB/T1967-1996多孔陶瓷孔道直径试验方法
15.Fabrication of Porous Al2O3 Ceramic Using Different Pore-Making Agent利用不同造孔剂制备Al_2O_3多孔陶瓷
16.Fatigue Behavior of Plain-woven C/SiC Ceramic Matrix Composite Specimen with Opening Holes平纹编织C/SiC陶瓷基复合材料开孔试样的疲劳行为
17.Influence of Open Hole on Mechanical Behavior of Plain-woven C/SiC Ceramic Matrix Composites开孔对平纹编织C/SiC陶瓷基复合材料力学行为的影响
18.The Study of High Bauxite Porous Ceramics and the Preparation of Porous Ceramics Bulk;高铝质多孔陶瓷的研制及多孔衬底的制备
相关短句/例句
porous SiC ceramicsSiC多孔陶瓷
1.The porous SiC ceramics were prepared by vacuum sintering in this investigation,the effect of different sintering aids,Al2O3-Y2O3 and Si,and different pore formers,acrylamide copolymer and Carboxymethyl Cellulose(CMC) on the microstructures and porosity were studied.采用真空烧结方法制备了SiC多孔陶瓷,研究了不同助烧结剂Al2O3-Y2O3、Si以及不同造孔剂丙烯酰胺聚合物、羧甲基纤维素(CMC)对SiC多孔陶瓷形貌和气孔率的影响。
2.Properties of the two kinds of porous SiC ceramics using PCS and SR as binder respectively were analyzed and compared.分别以聚碳硅烷和硅树脂作粘结剂,SiC微粉作骨料,在惰性气氛中1000℃下低温制备出SiC多孔陶瓷,所得样品的气孔率在43%～52%之间,抗断裂强度最高达到了18。
3.The flexural strength of porous SiC ceramics increased with increasing PCS content and shaping pressure,while decreased with increasing the carbon content.以聚碳硅烷为粘接剂,SiC粉末为骨料,经模压成型、惰性气氛保护下于1000℃裂解低温制得SiC多孔陶瓷。
3)SiC porous ceramicsSiC多孔陶瓷
1.The SiC porous ceramics preforms were fabricated by vacuum sintering, and the effects of different sintering aids including Al2O3-Y2O3, Si, Co and Kaolin as well as the content of Carboxymethyl Cellulose (CMC) on the porosity and microstructure of the SiC porous ceramics preforms were studied.本文采用真空烧结方法制备SiC多孔陶瓷预成形坯,研究了不同助烧结剂Al2O3-Y2O3、Si、Co和高岭土以及造孔剂羧甲基纤维素(CMC)含量对SiC多孔陶瓷预成形坯气孔率和形貌的影响。
2.Bio-morphology SiC porous ceramics was fabricated by the reaction infiltration of SiO vapor with the carbonized bamboo.以毛竹为原材料,碳化后制得竹炭为模板,采用气相SiO反应渗透法制备了生物形态SiC多孔陶瓷。
4)porous SiC ceramics多孔SiC陶瓷
1.Two kinds of methods were used to prepare porous SiC ceramics (PSC).采用两种不同的方法制备多孔SiC陶瓷 ,讨论了其显微组织对性能的影响 ,探索了由天然木材经炭化、渗硅处理制造多孔SiC陶瓷的新方法 。
2.The quasi-static compressive properties and the fracture morphology of 4 kinds of porous SiC ceramics/Zr-base amorphous alloy composites were investigated with the WDW-E100D testing machine and the S-4800 scanning electronic microscope(SEM).利用WDW-E100D型万能试验机和S-4800场发射扫描电镜,研究了不同工艺制备的多孔SiC陶瓷/Zr基非晶合金复合材料的准静态压缩性能和断口形貌特征。
5)porous silicon carbide based ceramics多孔SiC基陶瓷
6)Biomorphous porous SiC ceramics生物形态多孔SiC陶瓷
延伸阅读
多孔磷酸钙生物陶瓷分子式：CAS号：性质：是一种含活体细胞的骨替换材料。生物陶瓷为其提供良好的生物相容性和骨传导性；骨髓细胞作为其成骨细胞的源，赋予材料骨诱导性。可用于长骨段缺损的修复。
