抗烧蚀性能,anti-ablative property英语短句,例句大全

抗烧蚀性能,anti-ablative property
1)anti-ablative property抗烧蚀性能
1.According to the working requirements of hypersonic spacecrafts,reusable space vehicles and next generation rocket engines operating under the ultra-high temperature condition,a proposal to improve the anti-ablative property of 2D C/SiC composites by introduction of ZrB2 was presented.采用先驱体转化法制备了不同ZrB2含量的2D C/SiC-ZrB2新型复合材料,考察了ZrB2含量对材料力学性能、微观结构和抗烧蚀性能的影响。

英文短句/例句

1.Study on Anti-ablation Property of CrNiMo Steel Irradiated by LaserCrNiMo钢激光淬火处理的抗烧蚀性能研究
2.Synthesis and Anti-ablation Properties of in Situ ZrC Modified Carbon/Carbon Composites原位制备ZrC改性碳/碳复合材料及抗烧蚀性能研究
3.Synthesis and Properties of Ablative Phenolic Resin耐温抗烧蚀酚醛树脂的合成及其性能研究
4.This property is used to indicate the capacity of an oil to counter the corrosive effects of acidic products of combustion.该性能用于表示油品抵抗酸性燃烧产物腐蚀作用的能力。
5.Effects of Gd Addition on the Magnetic Properties and Corrosion Resistance of Sintered Nd-Fe-B Magnets添加Gd对烧结Nd-Fe-B永磁材料磁性能与抗蚀性的影响
6.Preliminary tests of non-ablative thermal protection materials非烧蚀型防热材料烧蚀性能初步试验研究(英文)
7.The mass loss rate and the ablation factor can be used to characterize the ablative properties of these materials correctly.采用质量烧蚀率和烧蚀因子可较好地表征和比较烧蚀材料的烧蚀性能。
8.Research Progress in the Ablative Resistance of Modified Phenolic Resin改性酚醛树脂耐烧蚀性能的研究进展
9.Experimental Study on Ablative Properties of Carbon/phenolic Composite碳/酚醛复合材料烧蚀性能的实验研究
10.STUDY ON FACTORS AFFECTING ABLATIVE PERFORMANCE OF C/C COMPOSITES炭/炭复合材料烧蚀性能影响因素分析
11.The Research of Strengthening, Toughening, Ablation and Oxidation of Molybdenum Disilicide Based Composite;MoSi_2的强韧化及氧化烧蚀性能研究
12.Improvement on Properties of Arc Resistance of CuW Alloy;提高CuW合金耐电弧烧蚀性能的研究
13.Research on the Erosion Wear of Reactive Sintering Silicon Carbide;反应烧结SiC陶瓷冲蚀磨损性能研究
14.Measurements of impulse coupling coefficient for laser ablating PVC film on transmission mode透射式激光烧蚀PVC冲量耦合性能实验
15.Ablation Resistance Properties and Mechanism of 3D C/SiC-TaC Composites3D C/SiC-TaC复合材料烧蚀性能及机理
16.Polymer seeded with metallic powders in ablation mode laser propulsion激光烧蚀掺杂金属粉工质的推进性能
17.ABLATION PROPERTY AND MECHANISM OF THREE DIMENSIONAL NEEDLED C/(SiC-TaC) COMPOSITES三维针刺C/(SiC-TaC)复合材料的烧蚀性能及烧蚀机理
18.Experimental Study on Sea Water Corrosive Action of Concrete and Forecast the Corrode Resisting Property of Concrete;混凝土抗海水侵蚀试验研究及其抗蚀性能预测

相关短句/例句

ablation performance烧蚀性能
1.Influence of microstructure of pyrocarbon on ablation performances of C/C composites;热解炭结构对C/C复合材料烧蚀性能的影响
2.Influence of ultrasonic treatment on mechanical performance and ablation performance of carbon fiber/polyarylacetylene超声处理对碳纤维/聚芳基乙炔复合材料力学性能与烧蚀性能的影响
3.The ablation performances of carbon /carbon composites with 3D fine woven pierced felt structure and carbon fiber needled bulk felt structure were respectively tested on an arc heater,and the morphologies of specimens were observed by scanning electron microscopy(SEM).结果表明:C/C复合材料的烧蚀由化学烧蚀和机械剥蚀共同控制,以机械剥蚀为主;细编穿刺毡结构C/C复合材料由于Z向纤维束的存在,加速了材料烧蚀表面粗糙度的变化,烧蚀率略高于针刺无纬布整体毡结构C/C复合材料;针刺无纬布整体毡结构C/C复合材料中无纬布层与烧蚀气流垂直,具有良好的烧蚀性能。
3)ablative property烧蚀性能
1.Interlaminar property and ablative property of coal cloth/polybenzoxazine composite modified with nano-carbon powder were studied in this paper.研究了纳米炭粉对炭布/苯并噁嗪复合材料层间性能和烧蚀性能的影响。
4)ablation property烧蚀性能
1.The ablation property of hybrid C/C composite at high temperature was investigated by the plasma torch as the thermal source.利用等离子体火炬为高温热源,研究了混杂C/C复合材料的烧蚀性能。
2.The ablation property of carbon-based composites during the re-entry was simulated by the ground-simulating system,which is based on the AC star type arc heater.利用以星型交流电弧加热器为核心的地面模拟系统对碳基复合材料再入过程中的烧蚀性能进行了模拟,并通过材料表面温度测量、图像采集和发射光谱在线检测等手段对烧蚀过程实时监测,为确定碳基复合材料的烧蚀机理,表征材料使用性能及材料优化设计提供必要的理论基础。
3.The ablation property was investigated by using oxyacetylene ablation equipment.为了提高连续碳纤维增强碳化硅(SiC)复合材料的抗烧蚀性能,采用浆料浸渗结合化学气相浸渗SiC工艺制备出三维针刺碳纤维增强SiC-碳化钽(TaC)复合材料。
5)ablative properties烧蚀性能
1.The elements which affected the ablative properties of silicone rubber heat shields were discussed.探讨了影响硅橡胶热防护材料烧蚀性能的因素。
2.The mechanical properties and ablative properties were investigated.针对固体火箭发动机喉衬的使用工况,提出并采用先驱体转化法制备了一种新型的复合材料,2D Cf/SiC-Cu材料(其中Cu作为发汗剂),对其力学性能和烧蚀性能进行了考察。
3.Also, it has been proved that BF/phenolic resin composite has best mechanical and ablative properties when the resin content is 36%.研究了胶含量对玄武岩纤维/酚醛树脂复合材料拉伸、压缩和层间剪切强度等力学性能、耐烧蚀性能的影响。
6)Ablative performance烧蚀性能
1.Their ablative performances were investigated by the plasma ablative method.采用金相显微镜和扫描电镜对炭纤维增强树脂炭复合材料微观结构进行分析,采用等离子烧蚀方法研究了炭纤维增强树脂炭复合材料不同方向的烧蚀性能,并对其烧蚀表面形貌进行扫描电镜观察,分析了复合材料烧蚀性能差异的原因。
2.By means of an analysis for the mechanism of thermal decomposition of polydimethylsiloxane elastomers, three methods of improving the ablative performance of the two component room temperature vulcanizing (RTV) silicone rubber for the inhibition of solid rocket propellants are proposed.通过对通用硅橡胶热分解机理的分析 ,提出了改善双组份室温硫化(RTV)硅橡胶耐烧蚀性能的三条途径。