凝固条件,Coagulation conditions
1)Coagulation conditions凝固条件
1.Effect of coagulation conditions on microstructure of as-spun PAN fiber;凝固条件对PAN初生纤维微结构的影响
2.The effect of the coagulation conditions on the diffusion coefficients was discussed and it revealed that adopting moderate.借助于圆柱体的一维线性模型,运用Fick第二定律推导出了溶剂和凝固剂扩散系数的表达式,利用KMnO4返滴定法测定出不同凝固时间的初生丝条中溶剂与非溶剂的含量,进而计算出各自的扩散系数;分析了各种凝固参数对溶剂和非溶剂扩散系数的影响规律,结果表明采用温和的凝固条件(高固含量及凝固浴浓度、低浴温及负牵伸率)可降低溶剂和凝固剂的扩散系数,实现均匀缓慢扩散。
3.The coagulation conditions greatly affect polyethersulfone membranes on morphology and performance.讨论了在聚醚砜/聚乙二醇/二甲基乙酰胺制膜体系中凝固条件的变化对膜的结构及性能的影响。
英文短句/例句

1.Effects of activated-calcium from egg-shell on the physical properties of tofu-gel鸡蛋壳钙凝固条件对豆腐凝胶特性的影响
2.Research on Solidification Behavior and Application of Magnesium Alloys by Sub-Rapid Solidification亚快速凝固条件下镁合金的凝固行为及其应用研究
3.The Influence of Solidification Conditions on the Microstructure and Properties of SiCp/Al-6Mg Composites凝固条件对SiCp/Al-6Mg复合材料凝固组织及性能的影响
4.Studies on Coagulation Conditions of Cellulose Membrane and Fiber in NaOH/Urea Aqueous Solution;NaOH/尿素溶液中纤维素膜和纤维的凝固条件研究
5.Microstructure Evolution of Al-5%Fe Hypereutectic Alloy Under Unidirectional Solidification定向凝固条件下Al-5%Fe过共晶合金的组织演化
6.Effects of Solidifying Condition on Microstructure and Nucleation Dynamics of Mg-Zn-Y Alloys;凝固条件对Mg-Zn-Y合金显微组织及形核动力学过程的影响
7.Effect of coagulation bath on microstructure and performance of PVDF/PVA blend hollow fiber membranes凝固条件对PVDF/PVA共混中空纤维膜结构及性能的影响
8.Rapid Solidification of Eutectic and Monotectic Alloy under Space Simulation Condition;空间模拟条件下共晶和偏晶合金的快速凝固
9.The Research on the Influence for Heat Transfer Condition to Solidification Structure of Aluminum Alloy;传热条件对铝合金凝固组织影响的研究
10.Testing Research on Performance of Strengthening Concrete Column with Carbon Fiber Sheet;冻融条件下碳纤维片材加固混凝土柱性能研究
11.Influences of Technological Conditions on Hypereutectic Al-Si Alloy Solidification Structure工艺条件对过共晶铝硅合金凝固组织的影响
12.Optimization on the Conditions for Immobilizing Papain by Sol-gel Method溶胶—凝胶法固定木瓜蛋白酶条件的优化
13.HEAT TRANSFER ANALYSIS OF PLANE FREEZE PHASE TRANSITION ON DOUBLE-CONVECTION CONDITION两侧对流条件下平面冻结凝固相变换热分析
14.Solidification behavior of Al-6.0wt% Cu alloy in mushy zone under temperature gradient温度梯度条件下糊状区的凝固行为研究
15.Numerical Analysis of Metal Solidification Process and Shrinkage Cavity Defects in the Centrifugal Accelerate Field离心加速条件下金属凝固过程及缩孔缺陷数值分析
16.Drop Dynamics and Solidification Mechanism of Water and Aqueous Solution under Acoustic Levitation;水和水溶液在声悬浮条件下的运动规律与凝固机制
17.Effects of Technological Conditions on Microstructure and Corrosion-Resistance Behavior of High Chromium Cast Irons;工艺条件对高铬铸铁凝固组织及腐蚀行为的影响
18.Study on the Evolvement of Solidification Microstructure of Magnesium-Alnminum System Alloys under Rare Earth Nd Modification Condition;稀土Nd变质条件下Mg-Al系列合金凝固组织演变的研究
相关短句/例句

solidification condition凝固条件
1.Effect of solidification conditions on the formation and structures of long period stacking structures in the Mg-Zn-Y alloys;凝固条件对Mg-Zn-Y合金中长周期堆垛结构的影响
2.Influence of solidification condition and Sr addition amount on microstructure of Al-13Si alloy;凝固条件和Sr含量对Al-13Si合金组织的影响
3.Electromagnetic stirring improved the solidification condition of 60Si2Mn spring steel and increased the amount of austenite nucleation,so the austenite grains were re.结果表明,电磁搅拌可以使60Si2Mn弹簧钢铸锭成分更加均匀,并可以减小或消除铸锭中发达的枝晶,电磁搅拌改善了60Si2Mn弹簧钢的凝固条件,增加了凝固过程中的形核率,使铸锭中的等轴晶得到细化。
3)coagulation bath conditions凝固浴条件
4)Flocculating conditions絮凝条件
1.Culture and flocculating conditions for Arthrobacter sp.LF-Tou2 capable to produce microbial flocculant;微生物絮凝剂产生菌节杆菌LF-Tou2的培养和絮凝条件研究
5)flocculation conditions絮凝条件
1.Research on flocculation conditions and coking wastewater treatment of Microbial Flocculants微生物絮凝剂的絮凝条件及焦化废水净化研究
2.The preparation,property and flocculation conditions of F_(00) microbial flocculant were studied.对F00微生物絮凝剂的制备、性质及絮凝条件进行了研究。
3.One of the strains is chosen and its flocculating activity and flocculation conditions are studied.从活性污泥中筛选出4株具有稳定絮凝活性的菌株,对其中1株进行絮凝活性及絮凝条件的研究。
6)flocculation condition絮凝条件
1.Optimize flocculation condition of processing wheat starch yellow thick liquid;小麦淀粉黄浆水的絮凝条件优化研究
延伸阅读

迟延凝固剂分子式:CAS号:性质:又称胶凝剂。加入胶乳中,能使胶乳从液态转变为均匀的半刚性固体凝胶,而且保持原有形状及大小的物质。迟延凝固剂常用的有硅氟化钠,碱性的钛、锆与硼的氟化物等。多用于胶乳泡沫制品的加工,以氟硅酸盐(如氟硅酸钠、氟硅酸钾)的应用最为普遍。