1)deep catalytic oxidation深度催化氧化
1.A series of Pt/γ-Al2O3,Pd/γ-Al2O3 and Pt-Pd/γ-Al2O3 catalysts were prepared by impregnation method for deep catalytic oxidation of o-xylene.采用浸渍法制备了不同负载量的Pt/γ-Al2O3,Pd/-γAl2O3及Pt-Pd/-γAl2O3双金属催化剂并用于邻二甲苯的深度催化氧化。
2.A series of supported copper,cobalt and copper-cobalt composite catalysts were synthesized by solid state reaction,and used for the deep catalytic oxidation of o-xylene.采用低温固相法制备了系列负载型铜、钴以及铜钴复合催化剂,用于邻二甲苯的深度催化氧化,以邻二甲苯的分解率和二氧化碳产率综合评价催化剂的活性。
英文短句/例句
1.The Study on the Complete Catalytic Oxidation of o-xylene over Manganese Oxide Catalysts锰氧化物深度催化氧化邻二甲苯的研究
2.Preparation of Supported Noble Metal Catalysts and Study on Deep Catalytic Oxidation of o-xylene;负载型贵金属催化剂的制备及对邻二甲苯深度催化氧化的研究
3.The Study on the Complete Catalytic Oxidation of o-Xylene over Transition Metal Oxides;过渡金属氧化物深度催化氧化邻二甲苯性能研究
4.Ultra-deep desulfurization of pentane with K_2FeO_4 by catalytic oxidation processK_2FeO_4催化氧化戊烷超深度脱硫技术
5.Research of Deep Desulphurization in FCC Gasoline with Oxidation and Extraction;催化裂化汽油氧化—萃取深度脱硫工艺研究
6.Research on deep desulphurization of coker gasoline by catalytic oxidation and extraction焦化汽油催化氧化及萃取深度脱硫研究
7.Deep Desufurization Catalyzed by Decatungstates十聚钨酸盐催化氧化燃油深度脱硫的研究
8.Waste Drilling Water Deep Processing Through Coagulation-Catalytic Oxidation深度处理钻井废水的混凝-催化氧化技术
9.Study on the advanced treatment of printing and dyeing wastewater by photocatalytic oxidation methodTiO_2光催化氧化法深度处理印染废水的研究
10.ADVANCED TREATMENT OF DRILLING WASTEWATER USING CATALYTIC OXIDATION钻井废水催化氧化深度达标处理技术研究
11.Study on advanced treatment of dyeing wastewater by catalytic ozonation process催化臭氧化法深度处理印染污水的实验研究
12.Ultrasound enhanced catalytic oxidative deep desulfurization of diesel with H_2O_2-trichloroacetic acid超声强化过氧化氢/三氯乙酸催化氧化柴油深度脱硫研究
13.Preparation and Photocatalysis Oxidative Deep Desulfurizatio for Diesel Oil of Photocatalyst Phosphotungstic Acid磷钨酸光催化剂的制备及光催化氧化柴油深度脱硫研究
14.Investgation of Oxidation properties of the Transition Metal Oxide Catalysts for Toluene and Acetone过渡金属氧化物催化剂对甲苯、丙酮深度氧化性能的考察
15.Study on Deep Desulfurization of Fuel Oil with Polyoxometalates as Catalysts多金属氧酸盐催化油品深度脱硫的方法研究
16.SUPER DESULFURIZATION COMBINED TECHNOLOGY OF FIBER FILM OXIDATIVE EXTRACTION-PHOTOCATALYSIS FOR FCC GASOLINE催化裂化汽油纤维膜氧化萃取-光催化氧化组合工艺超深度脱硫的研究
17.Advanced Treatment of Landfill Leachate by Heterogeneous Catalytic Ozonation Oxidation;非均相催化臭氧氧化深度处理垃圾渗滤液的研究
18.INFLUENCE OF HIGH TEMPERATURE AGING ON Pt AND Pd HONEYCOMB CATALYSTS FOR DEEP OXIDATION OF METHANOL铂、钯蜂窝催化剂高温老化对甲醇深度氧化的影响
相关短句/例句
deep oxidation深度氧化
1.Based on a series of experiments on the deep oxidation of toluene on copper-based catalyst which is prepared by wetness impregnation method,this paper investigates the optimal quantity of Cu that is supported on active aluminum oxide,the role of Cu and intermediate/final products in the course of the oxidation by means of instrument analysis such as FTIR,MS and XRD.运用浸渍法制备了一系列CuO/γ-Al2O3催化剂,利用FTIR、MS、XRD等技术研究了甲苯在该催化剂上的深度氧化的性能及反应机理。
2.The features of gas purification technology by using electron beam have been presented, the reaction principle and technological process of three processes, namely traditional electron beam process, semidry electron beam process, and deep oxidation process by using electron beam, being compared and analysed.对传统电子束法、电子束半干法与电子束深度氧化法的反应原理、工艺流程进行了比较及分析。
3)depth of internal oxidation内氧化深度
1.The depth of internal oxidation and the electrical conductivity were measured.以Cu2O为氧源,采用包埋法在自制真空炉胆内进行了Cu-Al合金平板试样的内氧化试验,测定了内氧化层深度和试样的电导率,建立了平板试样内氧化后Cu-Al合金层和弥散强化层共存下的电导率模型,推导出Cu-Al合金平板试样的内氧化深度X和电导率!的关系:!=41。
4)ClO2 extensive oxidationClO2深度氧化
5)advanced oxidative processes深度氧化法
6)catalytic oxidation催化氧化
1.Research progress in cyclohexanone synthesis by catalytic oxidation;催化氧化法合成环己酮技术研究进展
2.Performance of Cu-Mn/SiO_2 in catalytic oxidation of nitrogen monoxide;Cu-Mn/SiO_2催化氧化NO性能研究
3.Influence of Ni-Cu interaction on catalytic oxidation of benzyl alcohol;镍与铜的相互作用对于苯甲醇催化氧化性能的影响
延伸阅读
深度催化裂化分子式：CAS号：性质：是以重质石油馏分为原料，采用特别的催化剂在较高的温度下进行催化裂解，生产以丙烯为主，副产乙烯、丁烯的制取低分子烯烃的技术。工艺简称DCC。该工艺流程、主要设备与流化催化裂化相同。所用原料为重柴油和减压馏分油。裂化温度比一般催化裂化高，约550℃。所用催化剂为硅铝沸石类，具有择形性。为提高反应深度采用提升管反应器加床层反应器。所用原料愈轻总烯烃收率愈高。以原料油密度0.8449g/cm3和0.9100g/cm3为例，它们的总气烯、丙烯、乙烯和丁烯收率(m)分别为：47.63%、27.73%、5.79%、17.78%和26.2%、13.16%、3.58%、10.6%。其汽油馏分的辛烷值高RON96.5，含芳烃70%。该工艺的乙烯产率不如热裂解，但它的丙烯和丁烯产率较高，是生产某些石油化工产品的很好原料来源。该工艺技术成熟、装置相对简单，按相同原料处理量投资只为热裂解的1/3到1/4。
