1)Ni-Cr alloyNi-Cr合金
1.Interface microstructure and mechanical properties of Ni-Cr alloy porcelain materials;Ni-Cr合金烤瓷材料界面组织结构和力学性能
2.Influences of firing parameters on properties and microstructure of Ni-Cr alloy and porcelain interface;工艺参数对Ni-Cr合金与陶瓷界面组织性能的影响
3.Process of pulse electrodeposition of nanocrystalline Ni-Cr alloy from trivalent chromium bath;三价铬脉冲电沉积纳米晶Ni-Cr合金工艺
英文短句/例句
1.Studies on Technology and Basic Mechanism of Plating Ni-Fe、Ni-Fe-Cr Alloy Foil and Ni-Cr Alloy;Ni-Fe、Ni-Fe-Cr合金箔及Ni-Cr合金电沉积工艺和基础理论研究
2.Basic Study on Joining Technology of Ni-Cr Alloy and Dental PorcelainNi-Cr合金与陶瓷连接技术基础研究
3.Corrosion behavior of Ni-Cr alloys in 3.5% NaCl solutionNi-Cr合金在3.5%NaCl溶液中的腐蚀行为
4.Phase stability of Si/(Cr-Ni alloy)/Cu couples at 950 ℃Si/(Ni-Cr合金)/Cu扩散偶950℃相稳定性
5.Study of Ni-Cr Alloy Electroplating on N80 SteelN80钢电镀Ni-Cr合金工艺的研究
6.Surface graphitization on brazed diamond with Ni-Cr alloy in vacuum brazingNi-Cr合金真空钎焊金刚石的表面石墨化
7.Study on the Interface Behavior for the Porcelain Fused to Ni-Cr Alloy;烤瓷熔附Ni-Cr合金修复体界面行为的研究
8.Effect of Cr on Microstructure and Hardness of AlCrxCuFeNi High-entropy Alloy SystemCr对Al-Cr-Cu-Fe-Ni高熵合金组织与硬度的影响
9.Ni-Cr-C-CaF_2 Composite Laser Cladding on γ-TiAl Intermetallic Alloyγ-TiAl合金Ni-Cr-C-CaF_2复合材料激光熔覆
10.Microscope Phase-Field Simulation of Early Precipitation Process of Ni-Cr-Al Alloy;Ni-Cr-Al合金沉淀早期的微观相场模拟
11.The Research on Corrosion Resistant of Ni-Cr-Mo-Cu Alloy;Ni-Cr-Mo-Cu合金的耐蚀性能研究
12.Study on the Properties of Fe-Mn-Si-Cr-Ni-C Shape Memory Alloy;Fe-Mn-Si-Cr-Ni-C形状记忆合金性能研究
13.Corrosion Behavoir of Nickel-Based Alloys with Different Chromium Contents不同Cr含量的Ni基合金腐蚀行为
14.Study on Microstructure and Performance of Cr-Ni-Ti Alloy Prepared by Arc Melting电弧熔炼Cr-Ni-Ti合金组织与性能研究
15.CO_2 Corrosion Resistance of Fe-Cr-Ni-Mo Alloy 27-7MoFe-Cr-Ni-Mo合金27-7Mo的抗CO_2腐蚀性能
16.Study on Microstructure and Mechanical Properties of Ni-Cr-Mo Alloy Spinning TubesNi-Cr-Mo合金旋压管材组织性能的研究
17.Microstructure of high Cr content cast Ni-base superalloy K4648高Cr铸造Ni基高温合金K4648的显微组织
18.Hydrogen storage properties of Ti-Cr-Mn-M(M=V,Fe,Ni,Cu) alloysTi-Cr-Mn-M(M=V、Fe、Ni、Cu)合金的储氢性能
相关短句/例句
Cr-Ni alloyCr-Ni合金
1.The results of XRD indicated that, phase constitution of Cr-Ni alloy as cast wereα,γandσphases, quantity ofγphase increase with the increase in Ni content, and acicular Cr-Ni intermetallic compound was precipitated inαphase.相组成研究表明,铸态Cr-Ni合金主要由α、γ和σ相组成,随Ni含量的增加,γ相明显增加,α相内有针状CrNi金属间化合物析出。
3)Cu-Ni-Cr AlloyCu-Ni-Cr合金
1.Influence of Heat Treatment Specification on Microstructure and Properties of Cu-Ni-Cr Alloy;热处理制度对Cu-Ni-Cr合金组织和性能的影响
2.The Cu-Ni-Cr alloy strip was made using medium frequency smelting-iron mould cast-hot rolling-solution-cold rolling-aging treatment.采用中频熔炼-铁模铸造-热轧-固溶-冷轧-时效处理工艺,制备了Cu-Ni-Cr合金板材。
4)Ni-Al-Cr alloyNi-Al-Cr合金
1.Microscopic phase-field simulation for the temperature effects on the precipitation of Ni-Al-Cr alloy温度对Ni-Al-Cr合金沉淀影响的微观相场模拟
5)Fe-Ni-Cr alloyFe-Ni-Cr合金
1.Electrochemical behaviors of electrodepositing Fe2+,Ni2+,Cr3+ solely and Fe-Ni-Cr alloy have been studied by linear potential scan and cyclic voltammetry and the alloy plating were characterized by means of SEM and XRD in this study.利用线性电势扫描法和循环伏安法分别讨论了配位剂对Fe2+、Ni2+、Cr3+单独电沉积和Fe-Ni-Cr合金共沉积电化学行为的影响,并采用SEM和XRD技术对合金镀层表面形貌和结构进行了表征。
2.Fe-Ni-Cr alloy electrodepositing experiment on iron substrate in chlorid-sulfate solution by barrel plating was performed.在氯化物-硫酸盐混合体系中,在铁基上进行滚镀Fe-Ni-Cr合金实验,结果表明:滚镀所得的Fe-Ni-Cr合金镀层铬的含量只有2%左右,难以提高,且镀层表面质量不佳,常出现滚桶眼子印现象。
3.The progress of Fe-Ni-Cr alloy plating is summarized.概述电镀Fe-Ni-Cr合金的发展进程,从电沉积Fe-Ni-Cr合金的基本条件、镀液体系、电镀的类型以及镀层晶体结构类型等几个方面对电镀Fe-Ni-Cr合金的特点进行阐述。
6)nickel-iron-chromium alloyNi–Fe–Cr合金
延伸阅读
ZG4Cr25Ni35WNb合金中的共晶组织ZG4Cr25Ni35WNb合金中的共晶组织 717
