传热模型,heat transfer model
1)heat transfer model传热模型
1.Study on the heat transfer model ofheat transfer process for continuous cast slabs;连铸板坯热送过程传热模型研究
2.The research progress of heat transfer model of the heat exchanger for ground-source heat pump;地源热泵埋管换热器传热模型的研究进展
3.Laplace solution for heat transfer model of dam leakage;大坝渗漏传热模型及拉氏变换解
英文短句/例句

1.Modeling for Coaxial Tube Ground Heat Exchanger and Analysis of Heat Transfer;套管式地下换热器传热模型及其传热分析
2.The Studies of the Model for Vertical U-type Geothermal Heat Exchangers;U型竖直埋管地热换热器传热模型研究
3.Modeling and verification of immersed sewage exchanger沉浸式污水换热器的传热模型与验证
4.Underground Heat Exchanger Style and Heat Transfer Model of Ground-source Heat Pump土壤源热泵埋管换热器形式及传热模型的分析
5.Discuss the Underground Heat Interchanger Heat Transfer Model地源热泵地下换热器的传热模型的综述
6.The Application of Finite Element Method of Lines in the Research of Heat Exchanger under Ground有限元线法对地源热泵地热换热器传热模型的研究
7.Heat transfer model for a standing column well geothermal system循环单井井管-井孔-含水层传热模型
8.Analyze of the Numerical Calculation method and Heat Transfer Model of Air-cooled Condenser空冷凝汽器数值计算方法与传热模型
9.Mathematical model and analysis of contact heat transfer with radiation考虑辐射影响的接触传热模型与分析
10.Development of Solidification and Heat Transfer Model for Slab Casting at Baosteel宝钢板坯连铸凝固与传热模型的开发
11.Heat Transfer Model and Experimental Research on Biomass Fast Pyrolysis and Liquefaction;生物质快速热裂解液化传热模型与试验研究
12.Study on Coaxial Underground Heat Exchanger and Heat Transfer Model;同轴式地下热交换器及其传热模型研究
13.Study on the Model and Thermal Performance of Ice-ball Cool Storage System Using PCM Capsules;相变蓄冷球体堆积床传热模型及热性能研究
14.Transfer Modeling and Experimental Research on Concentric Tube Ground-Source Heat Pump in Operation of the Whole Year;套管式地源热泵全年运行试验研究与传热模型
15.Current situations and prospects of underground heat exchanger model地下埋管换热器传热模型研究现状与发展前景
16.Mathematical model of heat and mass transfer of rotary kiln and numerical simulation回转窑传热传质数学模型及数值仿真
17.Two Phase Flow Model and Conjugate Heat Transfer for Heat Pipe Heat Exchanger;热管换热器的两相流模型与耦合传热的研究
18.The Heat Transfer Model and Numerical Simulation on the Arctic Ice北极冰的热传递模型和数值模拟(英文)
相关短句/例句

Heat-transfer model传热模型
1.Two-dimensional steady-state heat-transfer model of ohno continuous casting process;热型连铸过程的二维稳态传热模型
2.A heat-transfer model for ice-on-pipe thermal storage apparatus was established and the curve of the glycol temperature, The ice thickness and ice thermal storage rates& totals versus time was obtained when the chiller keeps full load in practical project.建立了盘管式储冰装置的传热模型,得出了实际工程中保持机组满负荷运行工况下乙二醇进出储冰槽的温度变化曲线、盘管上冰的厚度随时间的变化曲线以及储冰槽逐时储冷量与总储冷量随时间的变化曲线,认为这些探讨有益于冰储冷装置的设计和系统的控制运行。
3.By calculations, the characteristics of the one-dimensional steady-state heat-transfer model were described, which had been suggested on heated mould continuous casting of pure metals.通过计算分析阐述了已有的纯金属热型连铸一维稳态传热模型的特性;在当量热导率、当量换热系数和固液界面位置一定的情况下,铸型温度与拉铸速度之间保持近似直线的关系。
3)Thermal model传热模型
1.Due to the complexity of thermal boundary conditions and physical features,however,thermal model solely obtained from heat analysis aspect is somehow not as precise as expected by comparison with real test data.由于复杂的物理和边界条件,单纯从传热的角度得到的航天器传热模型与真实情况存在差别。
2.In this paper,the development of thermal models of this structure with concise analysis was reviewed.由于该结构的最大优点是低温差传热、蓄热性及其冷热负荷的转移能力,因此传热模型对该结构的优化设计及优化运行极为重要。
4)heat transfer model热传导模型
1.A heat transfer model of the contucts was put forward according to skidding characteristics of friction sheets and heat transfer theory.根据摩擦片打滑的特点和导热理论 ,建立了接触点处的热传导模型 ,依该模型分析了接触区域温度分布的特点 ,得知温度沿材料厚度方向呈线性分布 ,接触点瞬时温度与单位面积摩滑功率和打滑时间成正比。
2.The influences of heat transfer model and variation of roll temperature on calculated result were analyzed.采用弹塑性大变形热力耦合有限元法研究了钢板热轧过程,侧重计算轧件厚向温度分布,并分析了热传导模型、轧辊温度变化对计算结果的影响。
3.The heat transfer model of a micro Direct Methanol Fuel Cell (μDMFC) based on heat transfer mechanisms is presented.根据各种传热机理建立了微型直接甲醇燃料电池的热传导模型,借助有限元分析工具,设计模拟了集成在微型直接甲醇燃料电池中3种不同结构的加热器。
5)heat transfer sub-model传热子模型
6)heat transfer model热传递模型
延伸阅读

钢锭凝固传热模型钢锭凝固传热模型mathematical model of solidification thermol conduction gongdingn一nggu ehuanre mox一ng钢锭凝固传热模型(mathematieal model ofsolidifieation thermol eonduetion)描述钢锭凝固过程中温度场变化规律的数学表达式。由钢液转变为钢锭或铸坯、铸件,要放出大量的热,包括钢液的过热显热、结晶潜热和凝固层的降温显热。凝固过程中这些热量的散失方式及其强度,直接影响钢锭的凝固速度、结晶组织、物理和化学不均匀性及表面质量等。钢凝固传热的基本规律及特点首先是钢锭和钢锭模在凝固过程中的温度场既随空间变化,又随时间变化,即属于三维不稳定态传热;其次,它包括钢锭模与钢锭凝固层间的传导传热,钢液内部的传导及对流传热,流动的钢液与凝固前沿的对流及传导传热,以及钢锭与锭模之间气隙中的辐射、传导及对流传热等等,属于综合传热过程。对如此复杂的三维不稳定态综合传热的凝共、刃仅为温度的函数,而与空间位置无关。这样,对于扁锭,三维的不稳定态导热微分方程式便简化为:贵一。10t上大下小镇”钢钢“内温度变化曲线图逃。。。。、、。、。。、、,。**。,*_七。卜品一嘛线都表示钢锭半高处的锭表