热流密度,heat flux英语短句,例句大全

热流密度,heat flux
1)heat flux热流密度
1.The research of detecting the operatiog states of mechanical. system based on heat flux density;基于热流密度监测机械系统状况的研究
2.A numerical method,based on single temperature sensor,constant heat flux assumed and arbitrary number future time steps,was employed to determine the heat flux during rapid cooling on high temperature surface with multiply immersed impinging water jets.基于单点测温、常热流假设,任意未来时间步长的导热反问题算法求解浸没水射流冷却过程的热流密度;采用有限容积法离散方程,附加源项法处理边界条件。
3.The meshing requirement of finite element model being considered,the storing technique and the calculating method of heat flux are expatiated.采用焊接仿真用到的经典高斯热源模型,设计了基于表参数热流密度加载算法。

英文短句/例句

1.ACCURATE MEASUREMENT OF HEATFLUXDENSITY──INTELLIGENT HEAT FLOW METER热流密度的准确测量─—智能热流计
2.Superheat decreases as the channel narrows at low heat flux, but it inverts at high heat flux.在较低热流密度下,窄通道强化传热;
3.Numerical Analysis of the Heat Transfer Character of Cold Plate of Two-phase with High Heat Flux;高热流密度相变均热板传热特性的理论研究
4.Experimental heat transfer research on molten salt receiver tube of high temperature and high flux高温高热流密度熔盐吸热管传热试验研究
5.Study on Critical Heat Flux of Liquid Jet Impingement Boiling on a Heated Flat Surface;受热平板上液体喷流沸腾临界热流密度的研究
6.Determination of Heat Flow Density in Fillet Radius Area of Billet Mold方坯结晶器角部弧形区热流密度测定
7.Numerical Analysis of the Heat Transfer Character in the Evaporator of Loop Thermosyphon with High Heat Flux;高热流密度回路型重力热管蒸发器传热特性的数值分析
8.A Fractal Model for Critical Heat Flux in Pool Boiling;池沸腾中临界热流密度的一个分形模型
9.Simulations on Melting Process of Tbab Chs under Turbulent flow with Constant Heat Flux定热流密度条件下的包络化合物浆管内湍流融化过程模拟
10.The experimental results show that water jet impingement induces higher heat flux, higher critical temperature and narrower transition temperature range.水冷实验数据分析结果表明：射流能提高热流密度和临界温度，缩小过渡区温度区间。
11.Study on the Heat Flux Density Measurement Technology Based on Image Processing for Oxyacetylene Flame;基于图像处理的氧乙炔火焰热流密度检测技术研究
12.The Phase-change cooling and Numerical Simulation of High Heat Flux Electronic Components in a Small External Space小空间高热流密度激光晶体的相变冷却及数值模拟
13.Error Analysis of On-site Detecting Heating Flux for Envelope Structure by Solar Radiation太阳辐射对围护结构热流密度的现场检测误差分析
14.The Experiment Research on the Convective Heat Transfer of High-Density Assembly Microchannel;高密度组装微通道对流换热实验研究
15.Fragmentation rules of coal water slurry spheres in thermal different-density fluidized bed水煤浆球在异密度热态流化床内的破碎规律
16.Progress in phase change fluid in field of high-density latent heat transportation相变流体在高密度潜热输送中的研究进展
17.Area Source Filament Thermion Emission Flow Density And Uniformity Analysis面源灯丝的热电子发射电流密度和均匀性分析
18.Experimental study on the factors affecting the interface between hot and cold fluid in the density lock影响密度锁内热-冷流体分界面因素的实验研究

相关短句/例句

Heat Flux Density热流密度
1.But,at the special heat flux density and the special magnetic field strength,the heating rate of oil is higher than the heating rate of water,and with the increasing of the magnetic field strength and the time of magnetization,the heating rate of oil and water is both increase.结果表明,磁场作用下,油与水的升温速率变化的规律是一致的,但在相同的磁场强度和热流密度的条件下,油的升温速率比水的升温速率要大;随着磁场强度的加大以及磁化时间的延长,其升温速率都明显增加。
2.When the maximum heat flux density is acquired,the experiment confirms the groove surface size as follows:0.实验确定了获得最大热流密度时的微槽表面尺寸为槽宽、槽深以及槽间距分别为0。
3.Secondly,a dimensionless model for finite-element method was established,and 167 706 numerical computations were carried out to study the dimensionless heat flux density on the outer surface of a freezing pipe with constant temperature,and then the relationships between the dimensionless heat flux density and its influe.应用相似理论将冻结温度场方程和参数无量纲化,然后建立无量纲的数值计算模型,研究了在外表面恒温情况下冻结管壁的无量纲热流密度与各无量纲影响参数间的关系。
3)heat flow density热流密度
1.Then, the mathematical expression of heat flow density on the tool-chip interface of the rake face is deduced on the basis of milling temperature experiment.采用相似原理对面铣加工过程中波形刃铣刀片表面的对流换热系数进行了分析 ,得出了对应的计算公式 ;结合铣削温度试验 ,推导出了前刀面刀—屑接触面输入的热流密度的函数表达式。
2.The floor surface temperature distribution,the interior temperature distribution of heat transfer calculation unit and the influencing factors of floor surface heat flow density and average floor surface temperature are analyzed with finite element analysis software ANSYS.采用有限元分析软件ANSYS,分析了地板表面温度分布、传热计算单元内部温度分布、地板表面热流密度的影响因素及地板表面平均温度的影响因素,在考虑地板向下传热时对模拟计算结果进行了修正。
3.The effect law of heat flow density on pressure undulation was obtained by experiments and theoretic study.本文模拟MK50动力系统构建了一套闭环的实验装置,以研究蒸汽发生器螺旋管内两相流动时的压力波动特性,通过实验和理论分析了热流密度对压力波动的影响规律,沸腾时其均方根和分维数与绝热两相流明显不同,热流密度的大小影响各特征参数。
4)thermal density热流密度
1.The results show that the ignition temperature of Fe-Ti-C system can be decreased greatly under the action of electric fields and great thermal density.结果表明,在电场和大热流密度作用下,体系的点火温度可以大幅降低,当压力为0～6MPa时,点火温度在310～464℃范围内。
2.The results show that the ignition temperature of Fe-Ti-C system can be decreased greatly under the action of electric field and great thermal density.结果表明:在电场和大热流密度作用下,体系的点火温度可以大幅降低;Fe含量越高,其对体系低温燃烧合成过程的影响越大。
3.The results show that the ignition temperature of Fe-Ti-C system can be decreased greatly under the action of electric field and great thermal density, and the ignition temperature is 390～570　℃ under different technological conditions.结果表明:在电场和大热流密度的共同作用下,体系的点火温度得到大幅度降低,且随工艺条件的不同在390～570℃范围内变化;200℃保温2min过程对体系的低温燃烧合成过程有较大的影响,即200℃保温压坯的点火温度和实际所达到的最高温度均高于相应的未保温压坯。
5)thermal flux热流率;热流密度
6)heat flux density field热流密度场
1.This article analyzes the geometrical properties of the pipeline with heating tracer,sets up the mathematics model and calculates the two-dimensional,unstable temperature field and heat flux density field of soil around the pipeline by using finite elements method.采用有限单元法对管道周围土壤的二维非稳态温度场和热流密度场进行了数值计算,并对输油管与伴热管上部未设保温板的工况进行了计算。