1)casting speed拉速
1.Statistical study on the effects of overheat and casting speed on cleanliness of rolled products;连铸钢液过热度和拉速对轧材纯净度影响的数理统计研究
2.Influence of casting speed variation on non-metallic inclusions in IF steel slabs;拉速变化对IF钢铸坯非金属夹杂物含量的影响
3.Influence of Increasing Casting Speed of Hypoperitectic Steel Slab on Heat Transfer of Mold提高亚包晶钢板坯拉速对结晶器传热的影响
2)drawing speed拉速
1.The improvement of the average drawing speed for 120 mm billet is introduced.介绍了120mm方坯拉速提高后,通过优化配水工艺、振动参数、结晶器倒锥度等措施,保证了产量、质量的稳定提高。
2.The technical reformation to increase the drawing speed of slab caster in No.介绍了邯钢三炼钢厂板坯连铸机提高拉速的技术改造实践,对改造前后连铸机的技术性能进行了对比,实践表明本次连铸机提速改造达到了提高产量和优化铸坯质量的目的。
3.It is considered that chemical component, molten steel temperature of tundish and drawing speed are the main elements.分析了宣钢炼钢厂Q235方坯产生内裂的原因,认为化学成分、中包钢水温度和拉速是导致Q235方坯产生内裂的主要因素。
3)withdrawal rate抽拉速率
1.Effects of withdrawal rate on microstructure and mechanical property of single crystal superalloy SRR99;抽拉速率对SRR99单晶高温合金组织和性能的影响
2.Relationship between primary dendrite arm spacing of Al-4.5%Cu alloy and withdrawal rate during unidirectional solidification;定向凝固Al-4.5%Cu合金枝晶组织与抽拉速率的关系
英文短句/例句
1.Effect of Drawing Rate on Microstructure Evolution of Ti-47.5Al-2Cr-2Nb-0.2B Alloys under Directional Solidification抽拉速率对Ti-47.5Al-2Cr-2Nb-0.2B合金的定向凝固组织的影响
2.INFLUENCE OF WITHDRAWING RATE TRANSITION ON THE PRIMARY DENDRITE ARM SPACING AND MICROSEGREGATION OF DIRECTIONALLY SOLIDIFIED SINGLE CRYSTAL SUPERALLOY DD3抽拉速率跃迁对定向凝固单晶高温合金DD3一次枝晶间距和微观偏析的影响
3.Lashing velocity of pump is concerned with nature of air.泵的抽气速率与气体的性质有关。
4.Well injection rates in a particular area would initially be generally similar to pumping, offtake, rates.对一个具体地段来说，井的注水速率开始时应当接近抽水速率。
5.Pro/E-based rapid development of multi-cavity box基于Pro/E的多型腔抽拉屉注射模快速设计
6.Influence of Withdrawal Rate on the Micro-Porosity of Super-Alloy DZ125 in Directional Solidification抽拉速度对高温合金DZ125定向凝固中缩松的影响
7.HRR Profile Stitching and Velocity Estimation of Step Frequency Radar频率步进雷达距离像抽取与速度估计的实现
8.Analysis of pumped-storage hydro using wind power with different probability distribution parameters of wind speed不同风速概率分布参数下的风力抽水储能分析
9.The Calculational Method of Pumping Rate in Medical Center Suction System医用中心吸引系统平均抽气速率的计算
10.The growth rate can exceed the pull rate and even be negative at a given time.生长速率可能大于拉晶速率，甚至某一时刻是负值。
11.Error Compensation Method and Rapid Accuracy Analysis for Missile Based on Latin Hypercube Sampling基于拉丁超立方抽样的导弹快速精度分析与误差补偿方法
12.Three-dimensional multi-phase field numerical simulation of the morphology selection of eutectic CBr_4-C_2Cl_6 alloy with different pulling velocities三维多相场数值模拟共晶CBr_4-C_2Cl_6合金在不同抽拉速度下的形态选择
13.Carbon black for use in the rubber industry--Determination of light transmittance of toluene extract--Rapid methodGB/T3780.15-1997橡胶用炭黑甲苯抽出物透光率的测定快速法
14.Slow Strain Rate Test Studies of Stress Corrosion Cracking of Pipeline Steels;管线钢应力腐蚀慢应变速率拉伸试验研究
15.Inner-product of Strain Rate Vector in Spherical Coordinate for Wire Drawing线材拉拔球坐标应变速率矢量场的内积
16.Stress Corossion Cracking Behavior of 5083 Aluminum Alloy in SSRT5083铝合金慢应变速率拉伸下的应力腐蚀行为
17.Microstructure of Al-Ni-Y Ternary Alloy with Directional Solidification Under Different Stretching VelocitiesAl-Ni-Y三元合金不同拉伸速率的定向凝固组织
18.Measurements of vehicle Velocity in Tractor Accelerating Slip-ratio Real-time Measuring拖拉机滑转率实时测量中的车速测量方法
相关短句/例句
drawing speed拉速
1.The improvement of the average drawing speed for 120 mm billet is introduced.介绍了120mm方坯拉速提高后,通过优化配水工艺、振动参数、结晶器倒锥度等措施,保证了产量、质量的稳定提高。
2.The technical reformation to increase the drawing speed of slab caster in No.介绍了邯钢三炼钢厂板坯连铸机提高拉速的技术改造实践,对改造前后连铸机的技术性能进行了对比,实践表明本次连铸机提速改造达到了提高产量和优化铸坯质量的目的。
3.It is considered that chemical component, molten steel temperature of tundish and drawing speed are the main elements.分析了宣钢炼钢厂Q235方坯产生内裂的原因,认为化学成分、中包钢水温度和拉速是导致Q235方坯产生内裂的主要因素。
3)withdrawal rate抽拉速率
1.Effects of withdrawal rate on microstructure and mechanical property of single crystal superalloy SRR99;抽拉速率对SRR99单晶高温合金组织和性能的影响
2.Relationship between primary dendrite arm spacing of Al-4.5%Cu alloy and withdrawal rate during unidirectional solidification;定向凝固Al-4.5%Cu合金枝晶组织与抽拉速率的关系
4)high casting speed高拉速
1.Practice on extend in mold copper life of high casting speed slab caster;延长高拉速板坯连铸机结晶器铜板寿命的实践
2.Oscillation marks formation for slab continuous casting with high casting speed was expatiated through stress analyses of initial solidifying meniscus shell during an oscillation cycle with stabilizing casting status at 2.0m/min拉速稳定浇铸时振动周期内弯月面初凝坯壳的受力情况,阐述了高拉速连铸坯表面振痕形成过程,给出振动参数与最大液体摩擦力和最大保护渣渣道动态压力关系;结合振动参数对振动过程参数的影响和实际设备状况,提出了振动参数优化方向,确定了拉速升至2。
3.A physical model was established to study the mechanism of molten slag behavior in slab continuous casting mould with high casting speed and argon blowing,and the effects of operation parameters on the liquid surface level oscillation and the slag entrapment were investigated.基于相似理论,利用物理模型研究了高拉速吹氩条件下结晶器内的卷渣行为,考察了工艺操作参数对结晶器内液面波动和卷渣行为的影响。
5)tensile rate拉伸速率
1.Effect of tensile rate on mechanical properties of NEPE propellant;拉伸速率对NEPE推进剂力学性能的影响
2.The effect of tensile rate on the lower yield strength of the iron and steel material was investigated,the advantage of the tensile rate of GB/T228-2002 was discussed.研究了拉伸速率对钢铁材料下屈服强度的影响,讨论了GB/T2 2 8-2 0 0 2中拉伸速率规定的科学性。
3.The effects of particle volume fraction, tensile rate and interface bonding strength on the properties of GB/HDPE composites were studied by tensile test and SEM observation.通过ＧＢ／ＨＤＰＥ的拉伸实验和断口形貌分析， 研究了颗粒体积分数、拉伸速率、界面强度对ＧＢ／ＨＤＰＥ复合材料力学性能的影响。
6)stretching speed拉伸速度
1.Effect about the stretching speed and other parameters to fiber bundle slenderizing processing;拉伸速度及其他参数变化对束纤维细化过程的影响
2.The effects of stretching speed change and different speed changing positions on the m value determined were discussed.探讨了拉伸速度的变化和不同变速位置对m值测试结果的影响。
延伸阅读
速禄飒拉1.象声词。风雨声。
