1)beam blank异型坯
1.Main Quality Defects And Controlling Methods for CC Beam Blank;异型坯主要质量缺陷及控制措施
2.Numerical simulation of thermal processing in continuously cast beam blank;连铸异型坯凝固过程的数值模拟
3.Effects of Mould Flux on Surface Quality of Continuous Casting Beam Blank;保护渣对连铸异型坯表面质量的影响
英文短句/例句
1.QUALITY PROBLEMS AND COUNTERMEASURES FOR NEAR-NET-SHAPE CC OF BEAM BLANKS近终形连铸异型坯的质量问题及对策
2.Research on Defects of 09CuPCrNi-A of Beam Blank Continuous Casting;09CuPCrNi-A耐候钢连铸异型坯缺陷分析
3.Study on the Control of the Surface Cracks and the Cleanliness for H-Beam BlankH型钢异型坯表面裂纹和洁净度控制研究
4.Optimization of Processing Technology of Continuous Casting Beam Blank;提高连铸异型坯质量的生产工艺优化研究
5.Technics Study of Reducing Longitudinal Surface Crack of Beam Blank减少连铸异型坯表面纵裂纹的工艺研究
6.Optimization on Mould Powder of Weathering Steel Beam Blank Continuous Casting耐候钢异型坯连铸结晶器保护渣性能优化研究
7.The Control System of the Beam blank Caster of Laiwu Steel Group莱钢异型坯连铸机控制系统的研究与应用
8.Trouble - shooting of Beam Blank Caster Dummy Bar Storage Device;异型坯连铸机引锭杆存放装置故障分析及处理方法
9.Simulation Study and Industrial Practice of Double SENs in Beam Blank Mold异型坯连铸双浸入式水口浇铸技术模拟研究及工业实践
10.Effect of Nozzle Outlet Angle on Fluid Flow and Level Fluctuation in a Beam Blank Casting Mould水口倾孔倾角对异型坯结晶器流场和液面波动的影响
11.COUPLED SIMULATION ON FLOWING AND SOLIDIFYING OF STEEL IN THE BEAM BLANK MOULD异型坯结晶器内钢水流动和凝固过程的耦合数值模拟
12.Analysis of Beam Blank Defects and Optimum Control for High Efficient Continuous Casting高效连铸下的异型坯质量缺陷分析及优化控制策略
13.STUDY OF MACRO-INCLUSION BEHAVIOR OF NEAR EVENTUALLY BEAM BLANKS近终形异型连铸坯中大型夹杂物行为研究
14.Research on the Abnormal Vibration and Fault Monitoring for Heavy Thin-Slab Hot Rolling Mill;大型薄板坯热连轧机异常振动与故障监测研究
15.Study on Micro-inclusions Behavior of Beam Blanks近终形异型连铸坯中显微夹杂物行为研究
16.glass parison玻璃雏型, 玻璃型坯
17.The Weaving Design and Production of End-and-end Grey Fabric;异经/异纬白坯织物织造设计与生产
18.program-controlled copying trimming lathe程序控制仿型修坯机
相关短句/例句
heterotype stock异型毛坯
1.then, it made use of Cimatron to carry out molding rough machining on heterotype stock.介绍通过使用普通机械进行初加工,再利用Cimatron对异型毛坯进行粗加工。
3)shaped slab异型扁坯
1.The hot-rolling process of shaped slabs and their rib-filling behavior were experimentally studied.研究了异型扁坯热轧成型过程及筋部充满规律。
4)nonuniform slab异型板坯
5)beam blank continuous casting异型坯连铸
1.The sticking break-out of beam blank continuous casting and the surface network crack of beam blank are introduced in this paper.介绍了09CuPcrNi-A 耐候钢异犁坯连铸时存在的黏结漏钢、表面网状裂纹等严重影响产品质量和生产的问题,分析了其产生原因,提出了相应的改进措施,主要包括优化钢种化学成分和保护渣性能,调整相关异型坯连铸工艺参数等,使异犁坯漏钢发生率显著下降,表面质最有所提高,满足了09CuPCrNi-A 耐候 H 型钢生产的需要。
2.The sticking break -out of beam blank continuous casting is introduced.09CuPCrNi-A耐候钢异型坯连铸时粘结漏钢严重影响生产,分析其产生原因,提出相应的改进措施。
6)Concasting Profiled Beam连铸异型坯
1.An Analysis on Surface Temperature of Concasting Profiled Beam Blank of Nb Microalloying Steel;Nb微合金化钢连铸异型坯表面温度分析
延伸阅读
实坯坯1.见"实丕丕"。
