硼钢,boron steel英语短句,例句大全

硼钢,boron steel
1)boron steel硼钢
1.Effect of Titanium Content on Structure and Toughness of Low Carbon Boron Steel 0.20C-1.1Mn-0.1V-0.004B;钛含量对0.20C-1.1Mn-0.1V-0.004B低碳硼钢组织和韧性的影响
2.Summarize the technical conditions of delivery boron steel in European standard EN 10083-3(1996);欧洲标准EN10083-3(1996)硼钢交货技术条件标准综述
3.It proves that producing boron steel with pig iron containing boron is practicable.对以含硼生铁为原料直接冶炼硼钢新工艺的关键问题进行了基础研究,为新工艺提供了理论依据。

英文短句/例句

1.Research on the Production and Properties of Boron Steel Produced by Using Pig Iron Containing Boron as Alloying Agent以含硼生铁为添加剂的硼钢的制备和性能研究
2.Study on the Hot Stamping Process of High Strength Steel Blanks;汽车超高强度硼钢板热成形工艺研究
3.The Effect of Zr、Cr、Ni on the Microstructure of High Boron SteelZr、Cr、Ni对高硼钢组织的影响
4.Boronizing of ZG1Cr18Ni9 austenite stainless steelZG1Cr18Ni9奥氏体不锈钢的渗硼
5.Laser Remelting on Surfaces of 20 Steel and 5CrNiMo Steel after Boronization;20钢和5CrNiMo钢表面渗硼后的激光重熔
6.STUDY ON CUT-PRESS BLADE OF BORONIZING 45 STEEL FOR MOSAIC45~#钢渗硼马赛克切压刀片的试验研究
7.Effect of Boron on Structures and Mechanical Properties of High Strength Spring Steels;硼对高强度弹簧钢组织与性能的影响
8.Surface Network Cracks in Low Carbon Boron Steel Casting低碳硼合金钢表面网状裂纹成因分析
9.Wear and corrosion properties of 45 steel boronised using Nd_2O_3 as activator稀土粉末渗硼45钢的磨损与腐蚀性能
10.Control on microstructure and mechanical properties of ML20MnTiB high strength cold-heading steel含硼高强度冷镦钢ML20MnTiB组织性能控制
11.Pack boronizing process and properties of the boride layer on 20CrMo steel20CrMo钢表面固体渗硼工艺及性能
12.The Study of Salt Bath Rare Earth (RE )--Boriding of 45 Steel at Low Temperature45钢(α+γ)双相区温度盐浴稀土硼共渗的研究
13.The Research of Chromium Boride Cladding on Steel Surface Formed in Melton Slag;熔渣法钢铁材料表面硼化铬覆层的研究
14.Study on Process and Microstructure Property of RE-boron-vanadizing for Carbon Steel;碳钢硼钒稀土共渗工艺与组织性能研究
15.Study on Boronizing Process and the Structure and Properties of Boride Layer of 4Cr13 Stainless Steel;4Cr13不锈钢渗硼工艺及渗层组织和性能的研究
16.Reinforcement Process of Cold Working Steel Bonded Carbide Dies by Surface Boronizing and Sulfurizing钢结硬质合金冷作模具硼-硫复合渗强化工艺
17.Austenite grain size and hardenability of Nb-B microalloyed gear steels铌硼微合金化齿轮钢的晶粒尺寸及淬透性
18.Microstructure and Hardness of Cr,B,C Ternary Cast-infiltrated on 45 Steel Surface45钢表面铬、硼、碳三元铸渗层的组织和硬度

相关短句/例句

boronated steel硼化钢，硼钢
3)high boron cast steel高硼铸钢
1.Effect of quenching temperature on microstructure and hardness of high boron cast steel;淬火温度对高硼铸钢显微组织和硬度的影响
2.Structure and performance of high boron cast steel liner;高硼铸钢衬板的组织和性能
3.A high boron cast steel with high strength and wear-resistant is obtained by adding 1.0%B,获得了高强度高硼耐磨铸钢,并研究了淬火温度对高硼铸钢显微组织和性能的影响。
4)high boron steel高硼钢
1.Simulating different solidification cooling rate with step-metal mould and sand mould,the effect of solidification cooling rate on microstructure and properties of high boron steel were studied.利用阶梯型腔金属模和砂型模拟不同的冷却速度,研究了冷却速度对高硼钢凝固组织和性能的影响。
2.5% B high boron steel under the non-vacuum and vacuum condition, the B content of the high boron steel was analyzed and the B recovery rate was calculated.5%的高硼钢,并取样分析高硼钢中B含量、计算B回收率,讨论分析试验过程中影响B回收率的因素,结果表明,熔炼时加入Ti,Zr以及稀土能对稳定B回收率起到积极作用。
5)Boron steel plate硼钢板
6)low carbon boron steel低碳硼钢
1.The effect of tiny amount of Titamium on the notch toughness of low carbon boron steel was investigated.研究了微量钛对低碳硼钢冲击韧性的影响。
2.The influences of B content and Nb,V micro-alloying on the impact toughness of low carbon boron steel were investigated by impact tests of low carbon boron steels with different boron contents and of Nb,V micro-alloyed low carbon boron steel.通过对不同B含量的低碳硼钢和Nb、V微合金化低碳硼钢的冲击实验,研究了B含量及Nb、V微合金化对低碳硼钢冲击性能的影响。