1)ultra-low carbon steel超低碳钢
1.Metallurgical effect test of tundish flux for ultra-low carbon steel;超低碳钢中间包覆盖剂的冶金效果试验
2.Influence of BN on ultra-low carbon steel continuous casting mold fluxes properties;BN对超低碳钢连铸保护渣性能的影响
3.Process optimization for production of ultra-low carbon steel by RH-MFBRH-MFB生产超低碳钢的工艺优化
英文短句/例句
1.PROCUTION OF UL RA-LOW-CARBON STEEL WITH RH REFINING济钢RH精炼法生产超低碳钢的实践
2.Analysis of Different Technological Processes on the Clean Degree of Ultra-low Carbon SteelBOF-RH-CC生产超低碳钢板坯洁净度研究
3.Total oxygen content control of ULC steel in the process of RH treatmentRH处理超低碳钢中总氧含量的控制
4.A Model for Predicting the Total Oxygen of Steel in the Process of RH TreatmentRH处理超低碳钢中总氧含量预报模型
5.Process optimization for production of ultra-low carbon steel by RH-MFBRH-MFB生产超低碳钢的工艺优化
6.The Analysis of Carburization for Extra Low Carbon Steels Produced by ASP Process at Anshan Iron and Steel Group Co.鞍钢1700ASP中薄板坯连铸生产超低碳钢钢水增碳分析
7.The Slab Quality Analysis of Ultra-low-carbon Steel at FTSC in BX-Steel本钢FTSC生产超低碳钢的铸坯夹杂物的分析
8.Improvement of the Ultra-low Carbon Steel Slab's C Element Increasing for No.4 CC宝钢4号连铸机超低碳钢冷轧成品性能的改善
9.Modeling the temperature-dropping pattern of the ultra-low-carbon finishing stands in the 2~(nd) hot-rolling plant at Wisco武钢二热轧超低碳钢精轧机组温降模型的建立
10.Research on refining process of ultra-low-carbon steel for thin slab casting超低碳钢薄板坯连铸钢水精炼工艺的研究
11.Comparison of different flow stress models for ultra low carbon steels during warm deformation超低碳钢低温变形流动应力模型的比较
12.Influence of RE Modifier on As-cast Grain Refinement of Super-low Carbon Cast Steel稀土变质剂对超低碳钢铸态晶粒细化的研究
13.cold-rolled carbon steel冷轧碳钢, 低碳钢
14.A Study on Cryogenic Toughness of Super Low Carbon 9Ni Steel Welding Joint超低碳9Ni钢焊接接头低温韧性研究
15.PRODUCTION OF ULTRA-LOW CARBON STEEL STRIP USED FOR HIODEN COVER IN CRT彩色显象管用超低碳荫罩钢带的研制
16.Study on Edge Folding Control for Hot-rolled Strip Ultra-low Carbon热轧超低碳带钢边部折叠控制的研究
17.Design of 308m~3 ultralow carbon Stainless Steel Spherical Tanks308m~3超低碳不锈钢球罐产品的设计
18.Discussion on procedure for submerged are welding of 316L extra-low-carbon stainless steel316L超低碳不锈钢埋弧焊焊接工艺探讨
相关短句/例句
ultra-low-carbon steel超低碳钢
1.Development on ultra-low-carbon steel mold powder of Baosteel;宝钢超低碳钢保护渣的开发
2.Effect of Mould Shielded Fluxes on Concasting Billet Surface Carbonization of Ultra-Low-Carbon Steel;结晶器保护渣对超低碳钢连铸坯表面渗碳的影响
3.Composite Treatment of Concasting Mold Flux for Ultra-Low-Carbon Steel;超低碳钢连铸结晶器用保护渣的超细复合处理
3)Ultra Low Carbon Steel超低碳钢
1.Comparison of different flow stress models for ultra low carbon steels during warm deformation超低碳钢低温变形流动应力模型的比较
2.To address the characteristics of deformation behavior and flowing stress of ultra low carbon steel in the hot-strip mill processing,a set of simulations were performed with THERMECMASTOR-Z thermo dynamic simulator.采用 THERMECMASTOR-Z 热/力模拟试验机研究了超低碳钢在铁素体区轧制过程的形变特征和流变应力,采用双段压缩试验方法研究了不同变形温度、道次间隔时间和变形程度对钢的流变应力和组织的影响。
3.The reason and mathematic analysis for carbon pick up from mold flux have been investigated in ultra low carbon steel.探讨了保护渣引起超低碳钢增碳的机理并进行了数学分析。
4)ULC steel超低碳钢
1.Study on the optimum process of refining ULC steel by RH degasserRH冶炼超低碳钢的最优工艺研究
2.Inclusions and total oxygen content in ultra-low carbon(ULC) steel were studied for the control of cluster inclusions in ULC steel.为控制超低碳钢中的簇状夹杂物,对超低碳钢中的夹杂物和与全氧含量的关系进行了研究。
3.The polarization curve of the ULC steel with titanium and niobium was measured to determine the suitable electrolytic parameters for preparation of TEM carbon replica samples.测定了一种复合添加钛、铌超低碳钢的极化曲线,选用合适的电流密度和电解时间以碳复型方法萃取钢中的析出相制备透射电镜观察用样品。
5)extra low carbon steel超低碳钢
1.Major factors affecting liquid steel decarburization and recarburization in the process of RH vacuum treatment and continuous casting of extra low carbon steel were analytically studied based on datum obtained from the previous experiments and measures to be taken for promoting liquid steel decarburization and preventing it from recarburization recommended as well.根据试验数据分析并研究了超低碳钢在RH真空处理和连铸过程中,影响钢水脱碳与增碳的主要工艺因素。
6)ultra low carbon IF steel超低碳IF钢
延伸阅读
超超1.谓超然出尘。 2.高高在上貌。 3.犹绰绰。 4.见"超超玄箸"。
