1)hollow glass bead空心玻璃微珠
1.Preparation and Properties Research of Epoxy Composites Modified by Hollow Glass Bead Treated with Polyurethane聚氨酯包覆空心玻璃微珠改性环氧复合材料的制备与性能研究
2.Research on preparation and properties of hollow glass bead filled epoxy composites空心玻璃微珠/环氧复合材料的制备及性能研究
3.The effects of glass bead content,its size and surface treatment of hollow glass beads on the compressive mechanical properties and water absorption of the modified bismaleimide(BMI) resin was filled by hollow glass beads were studied.采用空心玻璃微珠填充改性双马来酰亚胺(BMI)树脂,研究了玻璃微珠用量和粒径以及表面处理的玻璃微珠,对材料压缩性能以及吸水性的影响。
英文短句/例句
1.The Preparation of Microporous Polyethylene Using Hollow Glass Beads as Gas Carriers;以空心玻璃微珠为气体载体制备微孔聚乙烯
2.Phase Behavior of Hollow Glass Beads Filled Polystyrene (PS)/poly (Vinyl Methyl Ether) (PVME) Blends;空心玻璃微珠填充PS/PVME体系的相行为研究
3.Properties of Hollow Glass Bead Filled PE-HD空心玻璃微珠增韧高密度聚乙烯的性能研究
4.Research on preparation and properties of hollow glass bead filled epoxy composites空心玻璃微珠/环氧复合材料的制备及性能研究
5.Fabrication of Nanosized Magnetic Metal/Cenosphere Shell-Core Comoposite Microspheres;纳米磁性金属/空心玻璃微珠壳—核结构复合微球的制备
6.Study of the Properties and Preparation of Hollow Glass Microballon Filled PTFE Composite Material;空心玻璃微珠/聚四氟乙烯复合材料的制备及性能研究
7.Study on the Recipe of Hollow Glass Bead Modified Epoxy Resin Based on the Uniform Design基于均匀设计的空心玻璃微珠改性环氧树脂配方研究
8.Research progress of hollow glass microsphere and solid buoyant material for deep-sea application深潜用空心玻璃微珠和固体浮力材料的研制及其研究现状
9.Preparation and Properties Research of Epoxy Composites Modified by Hollow Glass Bead Treated with Polyurethane聚氨酯包覆空心玻璃微珠改性环氧复合材料的制备与性能研究
10.Magnetron sputtering of Al on hollow glass microspheres and its effects on the dielectric properties of artificial dielectric materials空心玻璃微珠表面磁控溅射镀铝及其对人工介质材料介电性能的影响
11.hollow flint glass含铅空心玻璃制品，无色空心玻璃制品
12.Performance and Microstructure Research on the Microsphere/Glass Fiber Reinforced Polyurethane Foam's Composites;中空玻璃微珠/玻璃纤维增强聚氨酯泡沫塑料的微观结构与性能分析
13.Study on the Preparation and Properties of EVA/Hollow Glass Beads Filled Heat-insulation CompositesEVA/中空玻璃微珠隔热复合材料的制备与性能研究
14.The Research on Excimer Laser Ethcing Hollow Glass Micro-spheres;空心玻璃微球球壳准分子激光刻蚀的研究
15.Surface modification of hollow glass microspheres with grafting polystyrene and its properties空心玻璃微球表面接枝聚苯乙烯及其性能研究
16.Fabrication of Ni Coatings on Glass Microspheres and Electromagnetic Properties空心玻璃微球镍镀层的制备及其电磁性能
17.Study on the Refractive Index Measurement of High Refractive Index Glass Beads;高折射率玻璃微珠折射率的测量研究
18.The Preparation of Cenosphere Composite Absorbent;玻璃微珠为基的复合吸波材料的制备
相关短句/例句
hollow glass microsphere空心玻璃微珠
1.Study on the influence of electroless silver plating on hollow glass microsphere by using surfactants;表面活性剂对空心玻璃微珠化学镀银影响的研究
2.The research on properities and structures of hollow glass microspheres packed epoxy resin;空心玻璃微珠填充环氧树脂的性能与结构研究
3.Research progress of hollow glass microsphere and solid buoyant material for deep-sea application深潜用空心玻璃微珠和固体浮力材料的研制及其研究现状
3)hollow glass microspheres空心玻璃微珠
1.Study of magnetic Ni-P alloy on hollow glass microspheres by electroless plating technique;空心玻璃微珠表面化学镀Ni-P合金磁性涂层的研究
2.Now their applications are widely, especially the Ag-coated glass fibres and hollow glass microspheres because of their small density, good conductivity, good stability to be made great attractive as conductive fillers.尤其是银包玻璃纤维和空心玻璃微珠因其密度小,导电性好,稳定性好等优点作为导电填料受到极大的关注。
3.Ni-coated hollow glass microspheres(HGM)were prepared by electroless nickel plating.通过化学镀在空心玻璃微珠(HGM)表面沉积了镍磷合金颗粒镀层,利用偶联取代传统的粗化处理,结合适当的镀覆工艺实现了饺层与微珠的紧密结合并达到了均匀完整包覆；在此基础上,进行了镍磷镀层表面湿化学还原法包覆钴铁合金的研究。
4)Cenospheres空心玻璃微珠
1.Study on electroless nickel plating activated without palladium on the surface of cenospheres;空心玻璃微珠表面无钯活化化学镀镍工艺研究
2.Influencing Factors on the Uniformity of Electroless Nickel Plating on Cenospheres;影响空心玻璃微珠化学镀镍均匀性的因素
3.By this activation process,electroless nickel on cenospheres surface was carried out.研究了在空心玻璃微珠表面化学镀镍磷合金的无钯活化新工艺。
5)hollow glass-bead空心玻璃微珠
1.The water soluble cores of composite materials were prepared by blending yellow dextrine,hollow glass-bead and urea and then molding,and the compressive strength and water solubility of the cores were tested.采用黄糊精、空心玻璃微珠与尿素等材料,通过共混模压工艺制备了新型的水溶性芯模材料,对其进行了压缩强度、水溶性等性能测试,分析了影响该芯模材料性能的因素。
2.Sub-micro-morphology, mechanical properties, thermal properties and water absorption of epoxy /hollow glass-bead blend for printed circuto were studied systematically.对用于印刷电路板的环氧树脂 /空心玻璃微珠复合体系的热性能、力学性能、亚微观形态和吸水性进行了系统的研究。
3.The outdoor cooling effects of the heat-insulated paints made from the hollow glass-beads coated titania or fly-ash floating beads coated titania were determined by self-made detection installation in different weather conditions.在不同的天气条件下,通过自制装置测定二氧化钛包覆空心玻璃微珠隔热涂料和二氧化钛包覆粉煤灰漂珠隔热涂料的室外降温效果。
6)Hollow glass beads空心玻璃微珠
1.Using this modified emulsion as film-forming material,hollow glass beads as function filler,and other fillers and additives,a new kind of water-based heat reflective coating was obtained,with a high reflectivity 82%,low thermal conductivity 0.以此改性乳液为基料,空心玻璃微珠为功能填料,辅以其他颜填料及助剂,制备了反射率达82%,导热系数为0。
延伸阅读
空心玻璃微珠一种经过特殊加工处理的玻璃微珠，其主要特点是密度较玻璃微珠更小，导热性更差。主要应用前景是油罐火灾的扑灭。空心玻璃微珠是一种尺寸微小的空心玻璃球体，属无机非金属材料。典型粒径范围10-180微米，堆积密度0.1-0.25克/立方厘米,具有质轻、低导热、隔音、高分散、电绝缘性和热稳定性好等优点,是近年来发展起来的一种用途广泛、性能优异的新型轻质材料。• 颜色纯白。可广泛用于任何对外观颜色有要求的制品中。 • 比重轻体积大。空心玻璃微珠的密度约是传统填充料微粒密度的十几分之一，填充后可大大减轻产品的基重，替代及节省更多的生产用树脂，降低产品成本。 • 具有有机改性（亲油性）表面。空心玻璃微珠润湿分散容易，可填充于大多数热固热塑性树脂中，如聚酯、环氧树脂、聚氨酯等。 • 高分散、流动性好。由于空心玻璃微珠是微小圆球，在液体树脂中要比片状、针状或不规则形状的填料更具有较好的流动性，所以充模性能优异。更重要的是这种小微珠是各向同性的，因此不会产生因取向造成不同部位收缩率不一致的弊病，保证了产品的尺寸稳定，不会翘曲。 • 隔热、隔音、绝缘、吸水率低。空心玻璃微珠的内部是稀薄的气体，所以它具有隔音、隔热的特性，是做为各种保温、隔音产品的极佳填充剂。空心玻璃微珠的隔热特性还可用于保护产品经受急热和急冷条件之间交替变化而引起的热冲击。较高的比电阻，极低的吸水率使其可广泛用于加工生产电缆绝缘材料。 • 吸油率低。球体的微粒决定了其有最小的比表面积及低吸油率，使用过程中可大大减少树脂的用量，即使在高添加量的前提下粘度也不会增大很多，大大改善了生产操作条件，可使生产效率提高10％～20％。广泛用于玻璃钢制品、复合泡沫塑料、人造大理石、合成木材、隔音保温材料、原子灰、深海浮力材料、保龄球、低密度粘合剂、密封材料、轻质树脂工艺品，壁画壁挂相框、墙板的夹心层结构、电子工业轻质封装材料、吸波材料、轻质混凝土、乳化炸药等。
