Ti2AlC,Ti_2AlC
1)Ti_2AlCTi2AlC
1.Layered ternary Ti_2AlC ceramic, as the typical representation of H-phase, combines unusual properties of both metals and ceramics.三元层状Ti2AlC陶瓷作为H相的典型代表,兼具陶瓷和金属的优点,在TiAl基中引入部分Ti2AlC,制备的TiAl/Ti2AlC复合材料,兼具两者的优越性。
2.In the study of microstructural evolution during self-propagating high-temperature synthesis of Ti_2AlC machinable ceramics from Ti-Al-C powders, a propagating combustion wave in the sample was quenched, and the microstructural evolution was observed with scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS).在研究Ti,C,A1摩尔比为2∶1∶1的混合粉末自蔓延高温合成Ti2AlC过程中的组织演变中,将在试样中蔓延的燃烧波强制淬熄。
3.The experiment results show that the main phase of combustion products changes to Ti_2AlC from Ti_3AlC_2 if TiC was added to the reactant mixtures as dilute agent without variation of overall Ti_2AlC stoichiometry by using Ti, Al and C powders as raw materials. 以钛、铝和碳黑单质粉末为反应物原料,在保持Ti∶Al∶C=2∶1∶1(摩尔比)不变的情况下,分别添加具有稀释剂作用的TiC,燃烧产物主晶相由Ti3AlC2变为Ti2AlC相,随着燃烧温度的降低,Ti2AlC相的含量逐渐增多。
2)Ti2AlC/TiAl compositeTi2AlC/TiAl复合材料
1.Ti2AlC/TiAl composites were in-situ prepared by the spark plasma sintering(SPS) and multi-step heat-treatment.利用放电等离子烧结(SPS)技术,原位制备Ti2AlC/TiAl复合材料,并对其进行多步热处理,研究增强相Ti2AlC和微量元素B对Ti2AlC/TiAl复合材料热处理组织的细化作用。
3)Ti2AlC/Ti-40Al matrix compositeTi2AlC/Ti-40Al复合材料
1.The in-situ synthesized Ti2AlC/Ti-40Al matrix composite were prepared by non-consumable arc melting technique with the reaction of titanium sponge, high purity aluminum and TiC/Al interalloy.利用海绵钛、高纯铝与TiC/Al中间合金反应,采用非自耗电弧熔炼工艺,原位合成Ti2AlC/Ti-40Al复合材料。
4)titanium[英][t?'te?ni?m][美][t?'ten??m]Ti
1.Structure and High Temperature Tribological Behavior of Carbonaceous Mesophases Doped with Metallic Elements-titanium (Ti) and Nickel (Ni);掺Ti/Ni碳质中间相的结构及其高温摩擦性能
2.The microstructural evolution of a nickel-base single crystal superalloy with different content of titanium as-cast state and during prolonged aging at 1000℃ was investigated.研究了不同Ti含量对一种镍基单晶高温合金的铸态组织以及在1000℃长期时效后的组织演化。
3.The natural corrosion potential,corrosion rate and steady-state polarization curves of Q235B carbon steel,TA2 titanium and navel brass in seawater were measured.测定了Q235B碳钢、TA2钛和海军黄铜在海水中的自然腐蚀电位、腐蚀速率和稳态极化曲线,测定了不同面积比时电偶对电偶电流的大小、方向,电偶电位以及电偶对阳极和阴极的失重速率,由电偶对不同面积比的数据得到Q235B碳钢被Ti电偶极化的动态极化曲线。
英文短句/例句

1.Study on the Ti/Cu and Ti/Ni Interface Reaction;Ti/Cu、Ti/Ni金属界面反应研究
2.The Study of Heat Deformation Behavior on Ti+P-IF Steel and Ti-IF Steel;Ti+P-IF钢和Ti-IF钢热变形行为的研究
3.Study on Al-Ti and Al-Ti-Ce Infiltrated Layers on Martensitic Valve Steel气阀钢表面Al-Ti及Al-Ti-Ce共渗层研究
4.Electro catalytic activity of titanium based on RuO_2-Co_3O_4 for oxygen evolutionTi/RuO_2-Co_3O_4阳极析氧性能
5.Preparation for and Study of Microstructures of Mesocarbon Alloy Doped Ti/Cu or Ti/Ni;掺Ti/Cu、Ti/Ni碳合金的制备及结构表征的研究
6.An Investigation on the Ti-V-Mn/Ti-Cr-V Hydrogen Storage Alloys and Hybrid Hydrogen Storage Vessel;Ti-V-Mn/Ti-Cr-V储氢合金及混合储氢容器的研究
7.Study on Structure and Performances of MoS_2-Ti and CrTiAlN+MoS_2-Ti Coatings;MoS_2-Ti及CrTiAlN+MoS_2-Ti复合涂层组织和性能的研究
8.The Studies of Ti-O/Ti-N Gradient Film on Artificial Heart ValveTi-N/Ti-O复合薄膜人工心脏瓣膜表面改性
9.Fabrication and Magnetic Properties of Ti(t)/Co(54nm)/Ti(t) Thin FilmsTi(t)/Co(54nm)/Ti(t)纳米薄膜的制备和磁特性
10.Brazing of C_f/SiC composite to Ti alloy using Ag-Cu-Ti-TiC composite filler materialsC_f/SiC复合材料与Ti合金的Ag-Cu-Ti-TiC复合钎焊
11.Preparation and Performance of Ru-Ir-Ti/Ti Electrode Coating by Sol-gel Process溶胶-凝胶法制备Ru-Ir-Ti/Ti阳极涂层及性能研究
12.MOLECULAR DYNAMICS SIMULATION OF DEPOSITING LOW-ENERGY ATOM Ti ON Ti(0001)SURFACETi(0001)表面低能沉积Ti原子的分子动力学模拟
13.Effect of Ni-Ti Alloy on the Microstructure and Mechanical Properties of Ti(C,N)-based Cermets;Ni-Ti合金对Ti(C,N)基金属陶瓷组织和力学性能的影响
14.Structure Macro Kinetics of Combustion Synthesis Al-T-C and Grain Refining Performance Evaluation;燃烧合成Al-Ti-C结构宏观动力学及Al-Ti-C细化效果评价
15.Research on Mechanical Properties and Toughing Mechanism of Ti/Ti-Al Micro Laminate Sheet Prepared by EB-PVD TechnologyEB-PVD工艺制备Ti/Ti-Al微层板的力学性能与增韧机制研究
16.Comparison of Ru-Ti-Ir-Ta/Ti Quarternary Coating Prepared by Different Techniques on Titanium Anodes不同方法制备的Ru-Ti-Ir-Ta/Ti四元涂层钛阳极的比较
17.STUDY OF PRECIPITATION IN Ti MICRO-ALLOYED STEEL PRODUCED BY THIN SLAB CASTING AND DIRECT ROLLING薄板坯连铸连轧流程Ti微合金钢含Ti析出物的研究
18.Continuous annealing of Ti and Ti+Nb bearing ultra-low carbon bake hardening steelsTiTi+Nb处理的超低碳烘烤硬化钢连续退火研究
相关短句/例句

Ti2AlC/TiAl compositeTi2AlC/TiAl复合材料
1.Ti2AlC/TiAl composites were in-situ prepared by the spark plasma sintering(SPS) and multi-step heat-treatment.利用放电等离子烧结(SPS)技术,原位制备Ti2AlC/TiAl复合材料,并对其进行多步热处理,研究增强相Ti2AlC和微量元素B对Ti2AlC/TiAl复合材料热处理组织的细化作用。
3)Ti2AlC/Ti-40Al matrix compositeTi2AlC/Ti-40Al复合材料
1.The in-situ synthesized Ti2AlC/Ti-40Al matrix composite were prepared by non-consumable arc melting technique with the reaction of titanium sponge, high purity aluminum and TiC/Al interalloy.利用海绵钛、高纯铝与TiC/Al中间合金反应,采用非自耗电弧熔炼工艺,原位合成Ti2AlC/Ti-40Al复合材料。
4)titanium[英][t?'te?ni?m][美][t?'ten??m]Ti
1.Structure and High Temperature Tribological Behavior of Carbonaceous Mesophases Doped with Metallic Elements-titanium (Ti) and Nickel (Ni);掺Ti/Ni碳质中间相的结构及其高温摩擦性能
2.The microstructural evolution of a nickel-base single crystal superalloy with different content of titanium as-cast state and during prolonged aging at 1000℃ was investigated.研究了不同Ti含量对一种镍基单晶高温合金的铸态组织以及在1000℃长期时效后的组织演化。
3.The natural corrosion potential,corrosion rate and steady-state polarization curves of Q235B carbon steel,TA2 titanium and navel brass in seawater were measured.测定了Q235B碳钢、TA2钛和海军黄铜在海水中的自然腐蚀电位、腐蚀速率和稳态极化曲线,测定了不同面积比时电偶对电偶电流的大小、方向,电偶电位以及电偶对阳极和阴极的失重速率,由电偶对不同面积比的数据得到Q235B碳钢被Ti电偶极化的动态极化曲线。
5)Ru-Ti-Sn/TiRu-Sn-Ti/Ti
6)Ti-700 titanium alloyTi-700
1.In this paper, the experiment methods of Transmission Electron Microscope (TEM) are adopted to study the microstructure and the phase of Ti-700 titanium alloy which has been heat-treated within the two-phase area.采用透射电子显微镜(TEM)研究了两相钛合金Ti-700在不同热处理制度下的显微组织和相结构。
延伸阅读

Titanium, acetylacetone bu alc. iso-pr. alc. complexesCAS:97281-09-9中文名称:乙酰丙酮、丁醇、异丙醇钛络合物英文名称:Titanium, acetylacetone bu alc. iso-pr. alc. complexes