热变形温度,Heat Distortion Temperature英语短句,例句大全

热变形温度,Heat Distortion Temperature
1)Heat Distortion Temperature热变形温度
1.Its heat distortion temperature reached to 265 ℃.利用正交试验优选了树脂配方,该树脂体系在有效降低粘度的同时,还提高了耐热性,优选配方树脂体系的热变形温度达到265℃。
2.The heat distortion temperature and notched impact strength of flame-resistant PA was enhanced highly,and the elongation rate and notched impact strength of flame-resistant PP was upgraded greatly,meanwhile the apparence of products was improved.在矿物增强阻燃复合材料中引入稀土表面改性剂对无机粉体进行活化处理,在保持阻燃性能的前提下,改善了阻燃剂及无机粉体材料与高分子材料的相容性,显著提高了阻燃PA材料的热变形温度和缺口冲击强度,明显提升了阻燃PP材料的伸长率和缺口冲击强度,产品表观状态也得到大幅度改善,阻燃复合材料的综合性能优异。
3.The heat-resistance properties of different thermosetting resin cured systems were measured by heat distortion temperature method(HDT),differential scanning calorimetry(DSC) and dynamic mechanical analysis(DMA).运用热变形温度(HDT)、示差扫描量热(DSC)和动态热机械分析(DMA)方法对不同热固性树脂固化体系的耐热性能进行了测试,并分析了测试结果差异与其物理机制的关系。

英文短句/例句

1.Test method of heat deflection temperature underbending load for plasticsGB/T1634-1979塑料弯曲负载热变形温度(简称热变形温度)试验方法
2.Finite Element Analysis of Temperature Field in Forging Process of Ti-1023 AlloyTi-1023合金热变形温度场模拟
3.The Influence Factors on the Measurement of Plastics Heat Distortion Temperature (HDT)塑料热变形温度测试影响因素的探讨
4.An investigation on temperature field and thermal induced distortion of laser diode end pumped Nd:YVO_4;LD端面抽运Nd:YVO_4温度场及热形变分析
5.Research on Relationship Between Temperature, Heat and Thermal Deformation and Calculating Method温度、热量与热变形的关系及计算方法研究
6.Thermal Deformation and Vicat Softening Temperature Tester Based on Neural Network PID Temperature Control基于神经网络PID温度控制的热变形与维卡软化温度测定仪
7.The dots turn red as they register heat.温度点变红以标记热度．
8.Study of Temperature Distribution and Deformation of the End-face in End-Pumped DPL端面抽运激光晶体热形变及温度场分布研究
9.Finite Element Analysis of the Welding Temperature Profiles and Thermal Distortion in DE-GMAW;DE-GMAW焊接温度场与热变形的有限元分析
10.The Development of a Thermal Deformation and Vicat Softening Temperature Microcomputer Measurement and Control System;热变形与维卡软化点温度微机测控系统的研制
11.The Analysis on Temperature Influence on CFL RC Beam Deformation in Thermo-mechanical Coupling Case热力耦合作用下CFL加固梁温度变形理论分析
12.DEFORMATION OF HOT-ROLLED STEEL OF GRADES Ⅰ, Ⅱ AND Ⅲ AFTER STRESS-TEMPERATURE EFFECT热轧Ⅰ、Ⅱ、Ⅲ级钢筋在应力-温度作用后的变形
13.Soil Temperature Change around Double U-type Buried Tube Heat Exchanger in Winter双U形地埋管换热器冬季周围土壤温度变化
14.Finite Element Analysis of the Welding Temperature Profiles and Thermal Distortion in Laser +GMAW Hybrid Welding Process;激光+GMAW复合热源焊接温度场和热变形的有限元分析
15.HOT DEFORMATION BEHAVIOR OF GH761 WROUGHT Ni BASE SUPERALLOYGH761变形高温合金的热变形行为
16.Water is converted to steam in the boiler, and the steam thus formed is superheated above the boiler temperature .水在锅炉里变成蒸汽，而这样形成的蒸汽再加热会超过锅炉的温度。
17.Analysis of temperture gradient and evaluate the thermal deformation or a vertical lathe column by using finite element method.用有限元法分析计算立车立柱的温度场及热变形
18.The Interface Element Method of Temperature Field And Thermal Deformation About Material Composite Casting-Roll And Its Study on Visual Simulation材料复合型铸轧辊温度场和热变形的界面元方法及其仿真研究

相关短句/例句

thermal deformation temperature热变形温度
1.Results show that thermal deformation temperature of the composites is improved evidently with incorporation of EAA and carbon black a little.结果表明 :加入少量的乙烯 -丙烯酸共聚物 (EAA)及炭黑后 ,可使复合材料的热变形温度明显提高 ;此外 ,不同的加工工艺对复合材料的热性能也有一定的影响。
3)HDT热变形温度
1.In this paper,several terms of thermal- setting resin are covered in detail, including HDT,Martin Temperature, Tg, insulating grade temperature & anti - corrosion application temperature, which is quite beneficial to resin choice or proper resin application.通过对热固性树脂的热变形温度、马丁耐热、玻璃化转变温度、绝缘耐热等级以及耐腐蚀使用温度五个温度概念的辨析,帮助人们在使用过程中理清头绪,正确选择树脂,有效应用于实际生产。
2.The effect of wollastonite on the HDT and mechanical properties of PP,and the effect of LDPE on the HDT and mechanical properties of PP/wollastonite composites were investigated.将PP与高填充量的硅灰石通过双螺杆挤出机熔融共混制得了PP/硅灰石复合材料;将PP/硅灰石复合材料与LDPE通过双螺杆挤出机进行二次共混制得了PP/LDPE/硅灰石三元复合材料;研究了硅灰石对PP的热变形温度(HDT)和力学性能的影响以及LDPE对PP/硅灰石复合材料HDT和力学性能的影响。
4)heat deflection temperature热变形温度
1.The way of heating air by using high temperature-air container was designed for the measurement of the heat deflection temperature(HDT)of polymer materials.提出了采用加热空气介质的高温空气槽测定材料热变形温度(HDT)的方法,通过几种高分子材料在油浴中及高温空气槽中测定HDT值的比较。
5)hot deformation temperature热变形温度
1.Influence of hot deformation temperature on microstructure and mechanical properties of TC18 alloy;热变形温度对TC18钛合金显微组织和力学性能的影响
6)thermal distorsion temperature热形变温度