循化,Xunhua英语短句,例句大全

循化,Xunhua
1)Xunhua循化
1.Bionomics and Control of Spring Cankerworm in Xunhua;循化春尺蛾生物学特性及其防治技术探讨
2.Effect of Culture Density on Agriculture Characters and Yield of Liner Chilli in Xunhua循化线辣椒栽培密度对农艺性状和产量的影响
2)Cyclic Hardening循环硬化
1.Implicit stress integration and finite element implementation of constitutive model for cyclic hardening materials;循环硬化材料本构模型的隐式应力积分和有限元实现
2.The results show that the aluminum alloy shows cyclic hardening both under multi-axial proportional and non-proportional loadings,while the cyclic additional hardening is shown under non-proportional loading,but the level is low.结果表明:合金在两种加载方式下均表现为循环硬化;在非比例载荷下合金表现出附加强化,但程度不明显;合金的疲劳寿命随等效应变幅的增加而降低,合金在非比例加载下的疲劳寿命低于比例加载时的疲劳寿命。
3.The cyclic hardening ability .结果表明:4种合金均表现为明显的循环硬化行为;具有较高钛含量的E14、M14合金的循环硬化能力高于低钛含量的E10和M10合金;合金的塑性应变能密度受应变幅的影响且具有循环相关性;高应变幅时,塑性应变能较高但随循环周次变化较小;当应变幅较低时,合金的塑性应变能较小但变化较大,特别是塑性较好的E10和M10合金;无论是电解加钛还是熔配加钛,钛含量为0。

英文短句/例句

1.Thehardening curve can be divided into three stages, i. e. first, rapid-hardening andsaturated stage.循环硬化曲线可以分成三个阶段:初始阶段、速硬化阶段和饱和阶段。
2.Constitutive Description for Non-Proportionally Ratcheting of Cyclically Hardening Material and Its Finite Element Implementation at High Temperatures;循环硬化材料高温非比例循环棘轮行为的本构描述及其有限元实现
3.The cyclic hardening behavior under different loading paths and different load conditions was studied.讨论了材料在不同加载路径及不同工况下的循环硬化特性。
4.The appearence of cyclic hardening/ softening depends on the virgin microstructure of materials and the shot-peening intensity.材料喷丸后发生循环硬化或软化,取决于材料的原始组织结构以及喷丸强度。
5.The Relationship of Heat Shock Protein 90 and Hyperdynamic Circulation in Cirrhotic Rats;肝硬化高动力循环与HSP90的关系
6.Perfusion Research of Pulmonary Microvascular by MSCT in Patients of Hepatic Cirrhosis;肝硬化患者肺微循环多层螺旋CT灌注研究
7.Cyclic Softening/Hardening Characteristic of a High-Strength Low-alloy 800MPa Grade Steel800MPa级低合金高强度钢的循环软硬化特性
8.Effects of plasma hydrogen sulfide on blood stream of portal collateral vessels in patients with cirrhosis血浆H_2S对肝硬化患者门脉侧枝循环血流的影响
9.Study on cerebral circulatory reserve (CCR) in cerebral infarction patients with carotid atherosclerosis动脉粥样硬化性脑梗死的脑循环储备功能研究
10.catalytic cycle oil催化(裂化)循环油
11.A chronic disease in which thickening, hardening, and loss of elasticity of the arterial walls result in impaired blood circulation.动脉硬化一种由于动脉血管粗化，硬化，失去弹力导致血液循环不畅的慢性病
12.Endothelin A Receptor mRNA Expression in Microcirculation of Gastric Mucosa During the Development of Liver Cirrhosis in Rats;大鼠肝硬化形成过程中胃粘膜微循环内皮素A受体mRNA表达及其意义
13.Relationship between carotid arteries plaque in acute anterior circulation territory infarction and matrix metalloproteinase-9.前循环脑梗死患者颈部动脉粥样硬化与MMP-9的关系
14.The Value of Color Doppler Ultrasonography in Monitoring Hemodynamic Changes in Patients with Hyperdynamic Circulatory State before and after Orthotopic Liver Transplantation超声监测肝硬化失代偿期OLT患者内脏高动力循环的改变及其意义
15.Relationship between circulating immune complexs and coronary atherosclerosis plaque循环免疫复合物与冠状动脉粥样硬化斑块的相关性研究
16.Clinical significance and features of nail fold microcirculation in systemic sclerosis patients甲襞微循环在系统性硬化症中的临床意义及特点
17.loop initialization循环初置(初始状态的), 循环初始化
18.The Clinical Study of the Influence of the Compound Salvia Miltiorhiza Injection on Some Index of Nailfold Microirculation and Liver Portal Hemodynamics in Patients with Liver Cirrhosls复方丹参注射液对肝硬化患者甲襞微循环及肝门脉血流动力学影响的临床研究

相关短句/例句

Cyclic Hardening循环硬化
1.Implicit stress integration and finite element implementation of constitutive model for cyclic hardening materials;循环硬化材料本构模型的隐式应力积分和有限元实现
2.The results show that the aluminum alloy shows cyclic hardening both under multi-axial proportional and non-proportional loadings,while the cyclic additional hardening is shown under non-proportional loading,but the level is low.结果表明:合金在两种加载方式下均表现为循环硬化;在非比例载荷下合金表现出附加强化,但程度不明显;合金的疲劳寿命随等效应变幅的增加而降低,合金在非比例加载下的疲劳寿命低于比例加载时的疲劳寿命。
3.The cyclic hardening ability .结果表明:4种合金均表现为明显的循环硬化行为;具有较高钛含量的E14、M14合金的循环硬化能力高于低钛含量的E10和M10合金;合金的塑性应变能密度受应变幅的影响且具有循环相关性;高应变幅时,塑性应变能较高但随循环周次变化较小;当应变幅较低时,合金的塑性应变能较小但变化较大,特别是塑性较好的E10和M10合金;无论是电解加钛还是熔配加钛,钛含量为0。
3)chemical recycling化学循环
1.High- quality regenerated polyesters are produced by physical recycling through melting, purifing and solid-state polymerization; high-purity monomers are produced by chemical recycling, which produce new polyesters.物理循环新技术通过熔融、净化、固态缩聚等过程制得高质量的再生聚酯;化学循环技术可获得高纯度的聚酯单体,用作直接合成新聚酯,并构成闭路循环的绿色化工过程。
4)cyclic softening循环软化
1.New description on cyclic hardening or cyclic softening behavior in low cycle fatigue;材料低周疲劳中循环强化或循环软化的新描述
2.Based on Wang-Lou's model,a method of continuous damage mechanics is used to get the low cycle fatigue damage model of polymers under triaxiality stresses with the consideration of the cyclic softening of polymer.采用连续损伤力学方法,在著名的王-楼模型的基础上,充分考虑了高分子材料的循环软化特性,得到了高分子材料三轴应力场中的低周疲劳损伤模型。
3.The cyclic softening/hardening features of the material were analyzed under symmetrical cyclic strain too.对调质42CrMo钢进行室温下各种应力循环和对称应变循环的低周疲劳实验,揭示材料的循环软化特性,棘轮变形和低周疲劳特性以及棘轮-疲劳交互作用。
5)cyclic oxidation循环氧化
1.Thermal cyclic oxidation behavior of NiCoCrAlYHf/EB-PVD TBCs;NiCoCrAlYHf/EB-PVD热障涂层的热循环氧化行为
2.The phase and the cyclic oxidation behavior of the cast alloy and the deposited coatings were investigated at 1 000 ℃ by using XRD,SEM and EDS technologies.通过X射线衍射、扫描电镜和能谱分析等技术对涂层的相结构和基体及涂层在1 000℃下的抗循环氧化行为进行了研究。
3.The cyclic oxidation behavior of the alloy K52 and its sputtered coating at 900℃ in air was investigated.利用磁控溅射的方法在K52高温合金上制备同成分的纳米晶涂层,研究了该合金及纳米晶涂层在900℃的循环氧化行为。
6)cycling purifying循环净化