缸内直喷,direct injection
1)direct injection缸内直喷
1.Development of a Spark-Ignited Direct Injection Flexible Fuel Engine for Gasoline and Alcohol Fuels;火花点火缸内直喷灵活燃料发动机的开发
2.Liquefied LPG direct injection has more efficiency than that injection at intake port and is one of effici.CNG缸内直喷技术从根本上解决了预混合方式中天然气燃料挤占进气空气造成充气效率下降的问题,可有效提高CNG发动机的动力性。
3.In this paper, the effects of stratified charge and assisted spark ignition on HCCI combustion was experimentally studied in a gasoline direct injection (GDI) engine.在缸内直喷汽油机(GDI)上试验研究了分层混合气和辅助火花点火对HCCI燃烧特性的影响,考察了对不同运行工况时的适应性。
英文短句/例句

1.Study on FAI Injection Two-Stroke DISI Engine;FAI二冲程缸内直喷汽油机的研究
2.The Research of Lean Burn Jet Combustion System with the Ignition Chamber;缸内直喷点火室稀薄燃烧系统的研究
3.Research and Development of ECU on Two-Stroke GDI Gasoline Engine;二冲程缸内直喷汽油机电控单元的研究与开发
4.Research on the Control System of 50cc FAI Two-Stroke DISI Engine;50cc FAI二冲程缸内直喷汽油机控制的研究
5.Research on Transient Process of Gasoline Direct Injection HCCI Combustion;缸内直喷汽油机HCCI燃烧瞬态过程的研究
6.The Experiment Study of Combustion Characteristics of Low Pressure CNG DI Engine低压缸内直喷CNG发动机燃烧特性的试验研究
7.Present Situation and Development Trend of Direct Injection CNG Engine压缩天然气缸内直喷发动机的现状及发展趋势
8.In-Cylinder Mixture Distribution of Direct Injection LPG Using Laser-Induced Fluorescence用激光诱导荧光法研究缸内直喷LPG混合气分布
9.Simulation of working pocess of LNG direct-injection engine缸内直喷LNG发动机工作过程的数值模拟
10.Recent Research and Development Direction on Gasoline Direct Injection汽油机缸内直喷技术的研究现状及发展方向
11.Development of Calibration Tool for GDI Engine with EMS Based on LabVIEW Software基于LabVIEW的电控缸内直喷发动机标定系统的开发
12.Research on Two Stage Gasoline Direct Injection Combustion System;基于两次喷射的汽油缸内直喷式燃烧系统的研究
13.The Study of Combination Combustion Mode for DME Injected into Intake Pipe and Methanol Injected Directly into Cylinder;二甲醚气道喷射与甲醇缸内直喷复合燃烧方式的研究
14.Multi-Dimensional Numerical Simulation for the Scavenging and Injection Processes in a Two-Stroke DISI Engine;二冲程缸内直喷汽油机扫气和喷油过程的多维数值模拟
15.Experimental Study on N-heptane Fueled Compound Combustion Engine Using Port/Direct Injection;正庚烷气道喷射/缸内直喷复合燃烧模式的特性试验研究
16.Research and Development of ECU on 50cc Two-Stroke GDI Engine;50cc二冲程缸内直喷汽油机电控单元的研究与开发
17.Simulation on Mixture Formation and Combustion Process in D.I. Hydrogen/ Diesel Engine缸内直喷加氢柴油机混合气形成与燃烧过程的数值模拟研究
18.Experimental Research on Knocking Suppression Using Stratified Stoichiometric Mixture in a GDI Engine分层当量比混合气抑制缸内直喷汽油机爆震的试验研究
相关短句/例句

GDI缸内直喷
1.Research of Combustion Chambers for FAI Two-stroke GDI Engine;FAI二冲程缸内直喷发动机燃烧室的试验研究
2.Development of Electronic Control System for GDI Gasoline Engine with FAI Technology;缸内直喷式二冲程汽油机FAI电控系统的开发设计
3.Research and Development of ECU on Two-Stroke GDI Gasoline Engine;二冲程缸内直喷汽油机电控单元的研究与开发
3)Direct-injection缸内直喷
1.An experimental study on the effect of fuel injection time and hydrogen fraction on combustion and emission characteristics of a natural gas direct-injection spark-ignited engine was carried out.在缸内直喷火花点火发动机上对天然气掺混氢气的体积分数为0%~18%的混合燃料不同喷射时刻下发动机的燃烧和排放特性进行了试验研究。
2.An experimental study was conducted on performance and emissions of a direct-injection spark ignited engine fueled with natural gas /hydrogen blends.对缸内直喷火花点火发动机燃用天然气氢气混合燃料时的性能与排放进行了试验研究。
4)direct injection缸内直接喷射
1.Numerical simulation of mixture formation for direct injection LPG engines;缸内直接喷射LPG发动机混合气形成过程模拟
5)gasoline direct injection汽油缸内直喷
1.The effect of intake boosting on extending homogeneous charge compression ignition(HCCI) high load operation was investigated in a 4-stroke gasoline direct injection engine.在1台四冲程汽油缸内直喷式发动机上研究了进气增压对HCCI高负荷拓展的影响。
6)GDI缸内直喷汽油机
1.Study on Improvement of Part-Load Performance in a GDI Engine Using Exhaust Gas Trap利用废气滞留改善缸内直喷汽油机部分负荷性能的研究
2.The effects of spark ignition on the HCCI combustion were investigated in a gasoline direct-injection(GDI)engine.在缸内直喷汽油机上实现了HCCI燃烧,研究了火花点火对HCCI燃烧特性的影响。
延伸阅读

激光喷码机与喷墨喷码机的比较喷印的图案文字和数码主要包括生产日期、有效期、批号、条形码以及商标图案。防伪标记和中文字样等,是贯彻卫生法和促进包装现代化强有力的设备。这种技术广泛应用于多行业,多材质表面,运行高速,稳定,适配各种车间,生产线工况的包装标刻。应用材质包括纸张、PVC、玻璃、塑料、橡胶、木材、陶瓷、皮革、布料等各种材质。应用对象目前主要分两大类,一类是产品的包装,主要分布在食品、饮料、烟草、酒类及医药行业:另一类是产品本身,即在产品上标注其规格型号等,使其成为产品本身的一部分内容,主要分布在电线电缆、建筑材料、电子产品和商务印刷等行业。