1)casing treatment机匣处理
1.Unsteady numerical analysis for casing treatment;机匣处理的非定常数值分析
2.CFD study on casing treatment in a transonic compressor;跨声速压气机机匣处理的数值研究
3.Numerical analysis of two circumferential groove casing treatments about a centrifugal compressor离心压气机周向槽机匣处理方案的对比分析
英文短句/例句
1.The Mechanism Research of Circumferential Grooves Casing Treatment on Stability Extension of Inclined-flow Compressor周向槽机匣处理对斜流压缩机扩稳的机理研究
2.Numerical analysis of two circumferential groove casing treatments about a centrifugal compressor离心压气机周向槽机匣处理方案的对比分析
3.A Study of the Stability Enhancement Achieved by the Casing Treatment of an Oblique-flow Impeller Equipped with a Rear-mounted Volute Housing带后置蜗壳的斜流叶轮机匣处理扩稳研究
4.Numerical Investigation and Comparison on the Stall Improvement Mechanism of Centrifugal Compressor with Inducer Casing and Bleeding离心压气机机匣处理与导叶轮缘放气的扩稳机理分析及比较
5.Effects of Casing Configuration on Post-Stall Performance of Axial Flow Compressor;新型机匣处理对轴流压气机过失速性能影响的研究
6.Numerical Analysis about Axial Slots Casing Treatment Extending Stall Margin of a Centrifugal Compressor轴向槽机匣处理提高离心压气机失速裕度的数值研究
7.Experimental investigation about the circumferential treating angle of non-axisymmetric casing treatments非轴对称处理机匣的周向处理范围的实验
8.Influence of Stepped Tip Gap Casing on Centrifugal Compressor Performance梯形间隙处理机匣对于离心压气机性能的影响
9.Effect of exciting frequency of casing treatment on transonic compressor performances处理机匣激励频率对跨声速压气机性能的影响
10.Experimental investigation of a solid/arc slot asymmetrical combined casing treatment实壁/圆弧斜槽周向不对称组合式处理机匣实验
11.Orthogonal experimental investigation of geometry structure of grooved casing treatment槽式处理机匣几何结构参数的正交试验
12.Numerical Investigation of Casing Treatments Influence on Performance and Stability of a HPC First Stage处理机匣对高压压气机性能和稳定性影响的数值模拟和试验研究
13.Development of the Automobile Black Box and the Post-analysis System for Traffic Accidents Reappearance;汽车黑匣子及其事故再现后处理系统的开发
14.Theory and Experimental Study on Aeroengine Casing Containment;航空发动机机匣包容性理论和试验研究
15.NONAXISYMMETRIC CASING ON AXIAL-FLOW COMPRESSORS轴流压气机非轴对称机匣造型的研究
16.Gas piston rod and receiver. Note the recess on the bottom of the receiver, it is for the bolt locking.导杆及枪匣，注意枪匣内下方的凹槽，供枪机闭锁用。
17.black box automatic device for recording details of the flight of a plane黑匣子（记录飞机飞行详情的自动装置）.
18.Analyze the data in the Black Box (the flight recorder) of the crashed plane分析失事飞机的黑匣子数据
相关短句/例句
casing treatment处理机匣
1.Plenum chamber casing treatment——numerical research of internal flow and mechanism of stall margin improvements;驻室式处理机匣——内部流动及扩稳机理的数值研究
2.3D numerical analysis for the effect between tip clearance and casing treatment in turbomachinery;压气机间隙流与处理机匣作用的三维数值分析
3.Design of a slot-type casing treatment and its experimental validation;一种槽道式处理机匣设计及实验验证
3)circumferential groove casing treatment周向槽处理机匣
1.A circumferential groove casing treatment was designed,the effects of circumferential casing treatment on the performance and flow field of a transonic axial flow compressor rotor was numerically investigated by performing a 3-D steady-state Navier-Stokes analysis.结果表明,数值模拟结果与实验结果符合良好,该周向槽处理机匣使压气机转子的失速点流量减小了11。
2.Role of tip leakage flow on flow instability and its control with circumferential groove casing treatment;在此基础上,利用周向槽处理机匣结构对顶部间隙泄漏流进行控制,并探讨了周向槽处理机匣结构提高压气机稳定工作裕度机理。
4)unsteady casing treatment非定常机匣处理
1.An experimental study on inhibition of unsteady casing treatment on stall inception;非定常机匣处理对失速先兆波的抑制作用实验研究
2.An experimental investigation of rotating stall margin improvement with unsteady casing treatments;非定常机匣处理扩大压气机稳定裕度实验
3.In the present work,experimental investigation is conducted with emphasis on the effect of unsteady casing treatments with injection on the stall margin and efficiency of a low spee.结果表明:非定常机匣处理能够在不同工作转速下对风扇稳定裕度有显著效果,效率没有明显改变。
5)Circumferential grooves casing treatment周向槽机匣处理
6)Non-axisymmetric casing treatment+非对称处理机匣
延伸阅读
匣龙1.相传战国时有人盗王子乔墓，发观内中唯有一剑，欲取之，"剑作龙鸣虎吼，遂不敢近，俄而径飞上天"。见《太平御览》卷三四三引《世说》。后因以称匣中的宝剑。
