微叠层材料,microlaminate英语短句,例句大全

微叠层材料,microlaminate
1)microlaminate微叠层材料
1.Large-sized Ti/Ti-Al microlaminated composite thin sheet with thickness of 0.相对于TiAl单体材料,微叠层材料的韧性有了较大提高,经致密化处理后的试样在层间界面对裂纹的钝化作用下,具有较高的拉伸强度,并表现出良好的延迟断裂特性。
2.The microstructure and mechanical properties of metal(NiCoCrAl)/ceramic(Y_2O_3-ZrO_2)microlaminate composites produced by EB-PVD was investigated.采用电子束物理气相沉积(EB-PVD)技术制备了金属(NiCoCrAl)/陶瓷(Y_2O_3-ZrO_2)微叠层材料,并对其微观结构和力学性能进行了分析。
2)microlaminates微叠层材料
1.Research on Microlaminates and Their Preparation;微叠层材料及其制备工艺研究进展
3)microlaminates composites微叠层复合材料
1.NiCrAl/Ni_3Al matrix microlaminates composites were fabricated by electron beam physical vapourdeposition(EB-PVD).利用电子束物理气相沉积技术(EB-PVD)制备了NiCrAl/Ni_3Al 微叠层复合材料,对叠层材料试样在制备态和740℃/32h 时效态于不同温度下的拉伸性能进行了力学试验,利用X 射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等测试手段对拉伸试样微观组织和力学性能进行了分析。

英文短句/例句

1.Study of NiAl/Al_2O_3 Micro-laminated Composite by EB-PVDEB-PVD制NiAl/Al_2O_3微叠层复合材料的研究
2.Interlaminar Stresses of a Laminated Composite Bar under Bending (Ⅰ)叠层复合材料杆弯曲的层间应力(Ⅰ)
3.Preparation and Magnetoelectric Effect of Multi-Layer PZT502/CoFe_2O_4 CompositesPZT502/CoFe_2O_4叠层复合材料的制备与磁电效应
4.Preparation of the Laminated Composites with Damping Function and Study on Its Properties;叠层阻尼功能复合材料的制备和性能研究
5.The Processing Techniques and Interface Research of Precious Metal Layered Composite Materials;贵金属层叠复合材料的制备工艺与界面研究
6.Bending-bending Fatigue Behaviors of 2D Carbon Cloth Laminates Carbon/Carbon Composites;二维碳布叠层C/C复合材料弯弯疲劳性能研究
7.New Analysis Methods of Dynamic Characteristics of Laminated and Braided Composites;叠层和编织复合材料动态特性研究的新方法
8.Al/AZ31 Multilayered Composite Prepared by Accumulative Rolling Bonding Technique and Its Strength累积叠轧焊制备Al/AZ31多层复合材料及其强度
9.Output displacement of actuator based on Terfenol-D multilayered composite叠层复合磁致伸缩材料驱动器的输出位移特性
10.Microstructures of Ablated Carbon Layer of C_f/PAA CompositeC_f/PAA复合材料烧蚀“碳层”的微观结构
11.An Experimental Study about Dropped-ply Region of Laminate under Compression;压缩状态下叠层复合材料层缩区力学行为的研究
12.Analysis of the Delamination of Rectangular Symmetrically-layered Composite Laminates under Low Velocity Impact对称角铺设矩形叠层复合材料板受低速冲击时的解层破坏分析
13.Research on Fabrication and Property of Fiber/resin/aluminum Alloy Laminated Composites;纤维/树脂/铝合金叠层复合材料的制备与性能研究
14.Analysis of magneto-mechano-electronic coupling factors in magnetostrictive/piezoelectric laminated composite磁致伸缩/压电叠层复合材料磁-机-电耦合系数分析
15.Processing and Performances of Electromagnetic-Shield Effectiveness Functionally Wood-Based Laminated Composites;木基电磁屏蔽功能复合材料（叠层型）的工艺与性能
16.Some Basic Problems in the Nonlinear Theory of Dynamic Stability For Composite Laminated Plates;复合材料叠层板非线性动力稳定性理论的几个基本问题
17.EFFECT OF ELECTROCHEMICAL CORROSION OF 2D CF ON C/C COMPOSITE MATERIAL PROPERTIES电化学氧化处理对2D炭布叠层C/C复合材料弯曲性能的影响
18.Study and Design on Ply Patterns of Low Thermal Expansion of Composites;微膨胀系数复合材料构件铺层设计研究

相关短句/例句

microlaminates微叠层材料
1.Research on Microlaminates and Their Preparation;微叠层材料及其制备工艺研究进展
3)microlaminates composites微叠层复合材料
1.NiCrAl/Ni_3Al matrix microlaminates composites were fabricated by electron beam physical vapourdeposition(EB-PVD).利用电子束物理气相沉积技术(EB-PVD)制备了NiCrAl/Ni_3Al 微叠层复合材料,对叠层材料试样在制备态和740℃/32h 时效态于不同温度下的拉伸性能进行了力学试验,利用X 射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等测试手段对拉伸试样微观组织和力学性能进行了分析。
4)multilayered materials叠层材料
1.Based on the thermal elastoplastic theory derived by Suresh, et al, a new theoretical model was developed to deal with the thermal stresses analysis for the multilayered materials.以三层叠层材料为例,基于Suresh等人建立的热弹塑性变形理论,考虑金属层从两侧均出现塑性区域的可能,建立了叠层材料热弹塑性分析的理论模型,给出了叠层材料在热载荷作用下完整的热弹塑性变形历史、热弹性塑性临界温度和热应力分析公式,推广和完善了Suresh等人的热弹塑性变形理论。
5)laminated materials叠层材料
1.In this paper, the authors first describe the characteristics of laminated materials and its applica- tions, analyze its structural properties, and present conceptions of the bounding pod and multi-bounding pad.简述了叠层材料的特点及其应用，分析了叠层材料的结构特点，提出了接合区和泛接合区的概念。
2.The laminated materials is composed of three kinds of materials, including aluminium alloy, Kevlar fiber reinforced composite, bullet-resistance ceramics.叠层材料由铝合金、芳纶(凯芙拉)纤维增强复合材料、抗弹陶瓷三种材料复合而成,不仅具备优良的抗弹性能,而且还具有轻量化、高机动性、防碎片、防核辐射、防探测和防生物化学武器的能力,目前已广泛应用于坦克、装甲车辆以及其它军用车辆的车体、炮塔中。
6)laminated material叠层材料
1.The properties of several kinds of paper made in China were analyzed and tested, the microstructure of the laminated materials were examined by scanning electron microscope, and optimal paper material suitable for laminated object manufacturing was proposed.提出了物体分层制造所用纸材的要求，对几种国产纸的性能进行了分析测试；对叠层材料的组织构造进行了扫描电镜观察；从中优选出适合于物体分层制造的国产纸，为快速原形物体分层制造叠层材料的国产化和生产应用创造了条件。